Peningkatan Ketahanan Aus pada Baja Tahan Karat Martensitik 13Cr AISI 410 setelah Proses Austenisasi dan Tempering [Improvement of Wear Resistance of 13Cr AISI 410 Martensitic Stainless Steel after Austenitizing and Tempering Process]
نویسندگان
چکیده
منابع مشابه
Evaluating Wear Properties of AISI 420 Martensitic Stainless Steel after Laser Transformation Hardening
As the turbine industries need to manufacture turbine blades made of martensitic stainless steel AISI 420 with high toughness and wear resistance, local laser hardening has become more and more important. In this research, surface of the samples was initially hardened by high-power pulsed laser beam; then, optimum parameters of hardening were calculated and wear resistance of surface hardened s...
متن کاملPHASE TRANSFORMATION DURING WEAR OF AISI STAINLESS STEEL 316
Abstract: Austenitic stainless steels exhibit a low hardness and weak tribological properties. The wear behaviour of austenitic stainless steel AISI 316 was evaluated through the pin on disc tribological method. For investigating the effect of wear on the changes in microstructure and resistance to wear, optical microscopy and scanning electron microscope were used. The hardness of the worn...
متن کاملBiomaterial Studies on AISI 316L Stainless Steel after Magnetoelectropolishing
The polarisation characteristics of the electropolishing process in a magnetic field (MEP – magnetoelectropolishing), in comparison with those obtained under standard/conventional process (EP) conditions, have been obtained. The occurrence of an EP plateau has been observed in view of the optimization of MEP process. Up-to-date stainless steel surface studies always indicated some amount of fre...
متن کاملevaluating wear properties of aisi 420 martensitic stainless steel after laser transformation hardening
as the turbine industries need to manufacture turbine blades made of martensitic stainless steel aisi 420 with high toughness and wear resistance, local laser hardening has become more and more important. in this research, surface of the samples was initially hardened by high-power pulsed laser beam; then, optimum parameters of hardening were calculated and wear resistance of surface hardened s...
متن کاملStudy on Slurry Paste Boronizing of 410 Martensitic Stainless Steel Using Taguchi Based Desirability Analysis (TDA)
The application of martensitic stainless steel in gas turbine blades, bushings, valves and mine ladder rungs requires wear and corrosion resistant surfaces. The process of boronizing can produce extremely hard and wear resistant surfaces for such components. The study depicts the application of Taguchi based desirability analysis for parameter design in the process of boronizing martensitic sta...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metalurgi
سال: 2017
ISSN: 2443-3926,0126-3188
DOI: 10.14203/metalurgi.v32i3.335