Peanut Husk Filled Polyethylene Composites: Effects of Filler Content and Compatibilizer on Properties
نویسندگان
چکیده
منابع مشابه
Metal Powder-filled Polyethylene Composites. v. Thermal Properties Metal Powder-filled Polyethylene Composites. v. Thermal Properties
Thermal properties—such as thermal conductivity, thermal diffusivity, and specific heat—of metal (copper, zinc, iron, and bronze) powder-filled high-density polyethylene composites are investigated experimentally in the range of filler content 0–24% by volume. Experimental results show a region of low particle content, 0–16% by volume, where the particles are distributed homogeneously in the po...
متن کاملCorrelation of filler content and elastic properties of resin-composites.
OBJECTIVES The aim was to determine the Young's modulus (E), bulk modulus (B), shear modulus (G) and Poisson's ratio (nu) of a series of composite restorative materials and to correlate them with their filler volume-fractions. METHODS Twelve model resin-composite formulations, with systematically varied volume-fraction (Tokuyama), a flowable resin-composite (Point 4 flowable, Kerr) and two hy...
متن کاملDynamic Mechanical Analysis of Compatibilizer Effect on the Mechanical Properties of Wood Flour-High-Density Polyethylene Composites
In this study, effect of MAPE (maleic anhydride polyethylene) as the compatibilizer on the mechanical properties of wood-flour polyethylene composites has been investigated by using Dynamic Mechanical Analysis (DMA). Composites were made at 25% and 50% by weight fiber contents and 1% and 2% compatibilizer respectively. Controls were also made at the same fiber contents without the compatibilize...
متن کاملEffects of monomer composition and original filler content on filler loading in the resulting centrifuged composites.
This study examined the effects of monomer composition, original filler content, and application of centrifugal force on the resulting filler loading of composites. Either Bis-MPEPP or UDMA was mixed with TEGDMA at a molar ratio of 1 : 1. Silane-treated silica (14-20 wt%) was added to each mixture. After the mixtures were centrifuged and light-polymerized, rate of increase was determined as the...
متن کاملEvaluation of Thermal Properties of E-Glass/ Epoxy Composites Filled By Different Filler Materials
This paper compares the values of the thermal and fire resistance properties of composites made using the hand layup technique. E-Glass fiber reinforced epoxy composites was fabricated by filling varying concentration of aluminum oxide (Al2O3), magnesium hydroxide(Mg(OH)2), silicon carbide (SiC), and hematite powder. The main aim of this work was to determine the thermal conductivity, thermal e...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Polymers
سال: 2015
ISSN: 2356-7570,2314-6877
DOI: 10.1155/2015/189289