Pb-Sn-Cu alloy plating from fluoborate baths by pulse and constant-current methods.
نویسندگان
چکیده
منابع مشابه
Electrodeposition and Characterization of Sn-Zn Alloy Coatings from Sulfate Based Baths
Tin-Zinc alloy coatings have many applications because of their unique properties such as corrosion resistance, solderability and flexibility. In this study, the effect of current density, temperature and pH on chemical composition, cathodic current efficiency, morphology and structures of the coatings was investigated. The results illustrated that, at low current densities (<0.5 mA/cm2), the c...
متن کاملThe Kinetics of Formation of Ternary Intermetallic Alloys in Pb-Sn and Cu-Ag-Sn Pb-free Electronic Joints
A simple model of the formation of Au0.1Ni0.1Sn0.8 in Pb-Sn solder/Ni interconnects is examined by numerical simulation. Previous experimental observation has shown that after reflow the interface consists of the Ni3Sn4 alloy between Pb-Sn solder and Ni, with Au distributed through the PbSn solder ball. Au0.1Ni0.1Sn0.8 was observed to form at the Pb-Sn solder/Ni3Sn4 interface during annealing a...
متن کاملSolder Joint Reliability of Pb-free Sn-Ag-Cu Ball Grid Array (BGA) Components in Sn-Pb Assembly Process
For companies that choose to take the Pb-free exemption under the European Union’s RoHS Directive and continue to manufacture tin-lead (Sn-Pb) electronic products, there is a growing concern about the lack of Sn-Pb ball grid array (BGA) components. Many companies are compelled to use the Pb-free Sn-Ag-Cu (SAC) BGA components in a Sn-Pb process, for which the assembly process and solder joint re...
متن کاملSelf-annealing in a two-phase Pb-Sn alloy after processing by high-pressure torsion
A Pb-62% Sn two-phase eutectic alloy was processed by high-pressure torsion (HPT) and stored at room temperature (RT) to investigate the occurrence of self-annealing. The microstructural characteristics and mechanical properties were recorded during self-annealing using scanning electron microscopy, tensile testing and nanoindentation. Processing by HPT produces a weakening effect but storage a...
متن کاملPb phase coarsening in eutectic Pb/Sn flip chip solder joints under electric current stressing
Experimental research on the Pb phase coarsening of eutectic Pb/Sn flip chip solder joint under current stressing is reported. Phase growth is observed under different current densities and temperatures. Higher current density leads to faster grain coarsening. Based on the test results, a grain coarsening equation including the influence of current density is proposed, dn dn 0 1⁄4 Kjmt. The cur...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Metal Finishing Society of Japan
سال: 1988
ISSN: 1884-3395,0026-0614
DOI: 10.4139/sfj1950.39.196