Patterned Printing of Fragrant Microcapsules to Cotton Fabric

نویسندگان

چکیده

Microcapsules with fragrance in the core were used to produce a scented textile. The wall of microcapsules was based on melamine-formaldehyde polymer while an essential oil core. They applied cotton fabric using screen printing two ways: over entire surface and by pattern. properties differently printed samples analyzed. evaluation performed, mechanical studied, antibacterial activity against Staphylococcus aureus Escherihia coli evaluated, resistance soil microorganisms determined. amount formaldehyde measured. results showed that all kept even after 10 washes. fully different from patterned fabric. None prints provided activity. All biodegradable. Less measured than samples. decreased washing.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Adhesion of perfume-filled microcapsules to model fabric surfaces.

The retention and adhesion of melamine formaldehyde (MF) microcapsules on a model fabric surface in aqueous solution were investigated using a customised flow chamber technique and atomic force microscopy (AFM). A cellulose film was employed as a model fabric surface. Modification of the cellulose with chitosan was found to increase the retention and adhesion of microcapsules on the model fabri...

متن کامل

Ink-Jet Printing Cotton with Cationic Reactive Dye Based Inks

The current commercial application of ink-jet reactive inks to cotton fabrics has been through pre-treating with pad liquor prior to printing. In This study made an effort to provide a single phase ink-jet printing process for printing cotton fabric using the novel cationic reactive dye in ink’s formulation. Cotton fabric was printed upon with the novel cationic reactive dye and commercial anio...

متن کامل

The Effect of Reactive Dye Structure on the Ink-Jet Printing of Cotton

The purpose of this study was to investigate the effect of the structure of reactive dye on cotton ink-jet printing. Cotton fabric was printed upon with three commercial cellulosic reactive dyes which are based on the similar chromophore and possess different numbers of reactive and anionic groups. Colour yield and absorbed dye fixation of the printed cotton were evaluated at various pHs. The i...

متن کامل

A Study on Ultraviolet Protection of 100% Cotton Knitted Fabric: Effect of Fabric Parameters

The effect of fabric parameters such as weight, thickness, and stitch density on the ultraviolet (UV) protection of knitted fabrics was studied. Different knitting structures such as plain, pineapple, lacoste, and other combinations of different knitting stitches of knit, tuck, and miss as well as half milano, full milano, half cardigan, full cardigan, 1 × 1 rib, and interlock were prepared. Ex...

متن کامل

Ellipsoidal decision regions for motif-based patterned fabric defect detection

This paper presents a study of using ellipsoidal decision regions for motif-based patterned fabric defect detection, the result of which is found to improve the original detection success using max–min decision region of the energy-variance values. In our previous research, max–min decision region was found to be effective in distinct cases but ill detect the ambiguous false-positive and false-...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Coatings

سال: 2022

ISSN: ['2079-6412']

DOI: https://doi.org/10.3390/coatings12050593