Passive drag control of a blunt trailing edge cylinder
نویسندگان
چکیده
منابع مشابه
Application of Passive Porous Treatment to Slat Trailing Edge Noise
Since its founding, NASA has been dedicated to the advancement of aeronautics and space science. The NASA Scientific and Technical Information (STI) Program Office plays a key part in helping NASA maintain this important role. The NASA STI Program Office is operated by Langley Research Center, the lead center for NASA's scientific and technical information. The NASA STI Program Office provides ...
متن کاملControl System Design for a Morphing Wing Trailing Edge
Shape control of adaptive wings has the potential to enhance wing aerodynamic performance during cruise and high-speed off-design conditions. A possible way to attain this objective is to develop specific technologies for trailing edge morphing, aimed at variating the airfoil camber. In the framework of SARISTU project (EU-FP7), an innovative structural system incorporating a gapless deformable...
متن کاملGross separation approaching a blunt trailing edge as the turbulence intensity increases.
A novel rational description of incompressible two-dimensional time-mean turbulent boundary layer (BL) flow separating from a bluff body at an arbitrarily large globally formed Reynolds number, Re, is devised. Partly in contrast to and partly complementing previous approaches, it predicts a pronounced delay of massive separation as the turbulence intensity level increases. This is bounded from ...
متن کاملDrag Optimization Study of Variable Camber Continuous Trailing Edge Flap (VCCTEF) Using OVERFLOW
This paper reports the results of a computational study that was conducted to explore the effect of various Variable Camber Continuous Trailing Edge Flap (VCCTEF) configurations on the lift and drag of a NASA Generic Transport Model (GTM) wing section at a span-wise location called the break station that marks a sharp change in the wing trailing edge slope. The OVERFLOW solver with the the one-...
متن کاملPassive jet control of flow around a circular cylinder
and suppressing fluctuating amplitude of the dynamic wind loads acting on the test model. With 24 suction/jet holes evenly distributed over the cylindrical test model (i.e., the N13 design of the present study), the passive jet control method was found to be able to achieve up to 33.7 % in drag reduction and 90.6 % in fluctuating wind loading suppression, in comparison with the baseline case. T...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Fluids and Structures
سال: 2009
ISSN: 0889-9746
DOI: 10.1016/j.jfluidstructs.2008.07.008