Passive Athermal Optical Design Method Considering Thermal-Induced Surface Deformation

Design and fabrication of an effective micromixer through passive method

Micromixer is a significant component of microfluidics particularly in lab-on-chip applications so that there has been a growing need for design and fabrication of micromixers with a shorter length and higher efficiency. Despite most of the passive micromixers that suffer from long mixing path and complicated geometry to increase the efficiency, our novel design suggests a highly efficient micr...

Calculation of cable thermal rating considering non-isothermal earth surface

The study presents an algorithm to compute the heat transfer coefficient for thermal cable rating when modelling the non-isothermal earth surface with the additional wall method. The position of the fictitious images is computed analytically by recognising that the complex geometrical arrangement can be converted into a much simpler one using the Fourier transform. This allows for the estimatio...

Monitoring of mining induced surface deformation

The main objective of the project ”Monitoring of mining induced surface deformation” (ALOS-RA-94) is to evaluate multi-temporal PALSAR data for land surface deformation monitoring, using interferometric techniques. Differential interferometry using PALSAR data over several mining sites in Germany, Poland and Czech Republic, as well as over alpine landslides in Switzerland and Italy was used to ...

Memetic Method for Passive Filters Design

DESIGN FOR MANUFACTURABILITY ASIC design flow considering lithography-induced effects

As VLSI technology scales towards 65 nm and beyond, both timing and power performance of integrated circuits are increasingly affected by process variations. In practice, people often treat systematic components of the variations, which are generally traceable according to process models, in the same way as random variations in process corner-based methodologies. In particular, lithography-indu...