Partitioning behavior of alloying elements in PWA 1484

Effects of Specimen Geometry and Coating on the Thermo-mechanical Fatigue of Pwa 1484 Superalloy

Effects of Alloying Elements on Martensitic Transformation Behavior and Damping Capacity in Fe-17Mn Alloy

Effect of carbon and Ti on 7-s martensitic transformation behavior and damping capacity has been investigated in an Fe-17Mn alloy. The suppressive force of carbon against 7-s transformation increases linearly with an increase in carbon content, lowering M, temperature and volume fraction of s martensite. Carbon deteriorates damping capacity by reducing the area of y l e interfaces and by decrea...

Roles of Alloying Elements on the Corrosion Behavior of Sputter-deposited Amorphous

Ternary amorphous W–xCr–yZr alloys containing 9−38 at % tungsten, 15−42 at % chromium and 39−73 at % zirconium were successfully prepared by direct current (DC) magnetron sputtering technique. The corrosion rates of all the examined sputter−deposited W–xCr–yZr alloys were in the range of 1 × 10−3 mm/y or lower which are nearly one order of magnitude lower than those of the sputter−deposited tun...

The Role of Alloying Elements on the Crevice Corrosion Behavior of Ni-Cr-Mo Alloys

The roles of the alloying elements Mo, Cr, and W in resisting crevice corrosion of UNS N06022, UNS N06625, and UNS N10362 have been studied under galvanostatic conditions in 5 mol/L NaCl at 150°C. Corrosion damage patterns were investigated using surface analytical techniques such as scanning electron microscopy and optical imaging, and the corrosion products characterized by energy dispersive ...

Computational modeling of effects of alloying elements on elastic coefficients

Models for composition and temperature dependencies of single-crystal elastic stiffness coefficients are developed and applied to the Al12Mg17 and hexagonal closed-packed solution phases in the Mg–Al system based on data from first-principles calculations. In combination with models for multi-phases, the bulk, shear, and Young’s moduli of Mg–Al alloys are predicted and compared with available e...