Particle Finite Element Simulation of Fresh Cement Paste – Inspired by Additive Manufacturing Techniques
نویسندگان
چکیده
منابع مشابه
Finite Element Simulation and Additive Manufacturing of Stiffness-Matched NiTi Fixation Hardware for Mandibular Reconstruction Surgery
Process parameters and post-processing heat treatment techniques have been developed to produce both shape memory and superelastic NiTi using Additive Manufacturing. By introducing engineered porosity, the stiffness of NiTi can be tuned to the level closely matching cortical bone. Using additively manufactured porous superelastic NiTi, we have proposed the use of patient-specific, stiffness-mat...
متن کاملOptimization of Supports in Metal-based Additive Manufacturing by Means of Finite Element Models
Metal-based additive manufacturing processes require a supporting of overhanging part areas during the powder solidification e. g. for improving the heat dissipation to the substrate. Technology users nowadays strive to reduce support areas due to economical aspects, while simultaneously enhancing the process stability by maximizing the support stiffness. For the simplification and acceleration...
متن کاملFinite element simulation of compressible particle-laden gas flows
Amacroscopic two-fluid model of compressible particle-laden gas flows is considered. The governing equations are discretized by a high-resolution finite element method based on algebraic flux correction. A multidimensional limiter of TVD type is employed to constrain the local characteristic variables for the continuous gas phase and conservative fluxes for a suspension of solid particles. Spec...
متن کاملAppropriate Loading Techniques in Finite Element Analysis of Underground Structures
Stability of underground structures is assessed by comparing rock strength with induced stresses resulted from ground stresses. Rock mass surrounding the opening may fail either by fracture or excessive deformation caused. Accurate calculation of induced stresses is therefore fundamental in the stability analysis of an opening. Although numerical methods, particularly finite element method, are...
متن کاملFinite Element Simulation of Welding Distortion in Large Structure
Fusion welding is widely used in heavy industries to join different parts together. But sometimes welding-induced distortions cause problems like misalignment during assembling and make costs to remove them. Thus it is imperative to predict and mitigate them to improve weldments quality and also reduce in fabrication costs. This study at first will introduce inherent deformation method for pred...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: PAMM
سال: 2019
ISSN: 1617-7061,1617-7061
DOI: 10.1002/pamm.201900198