Particle Dispersibility Improvement of Polyester Fibers with a New Line Injection

Improvement of Strength Parameters of Sand Reinforced with Polymeric Fibers

Triaxial consolidated drained, unconfined compression, and CBR tests have been conducted in order to study the stress-strain, strength, and volume change characteristics of fine sand specimens reinforced by polymeric fibers made from carpet wastes. The variables are aspect ratio (length/width) and weight percentage of the fibers. The results indicate that the peak strength and total volume chan...

Polyester Nanocomposite fibers with Antibacterial Properties

Antibacterial nanocomposite polyester (PET) fibres were melt spun by adding nano ZnO loaded Linear Low Density Polyethylene (LLDPE) master batch (MB) to the PET chips. The influence of content of nano ZnO on the antibacterial properties, crystallization behaviour and mechanical properties was studied. It was found that PET composite fibres having 1 % nano ZnO showed the optimum antibacterial ac...

Improvement of Strength Parameters of Sand Reinforced with Polymeric Fibers

Triaxial consolidated drained, unconfined compression, and CBR tests have been conducted in order to study the stress-strain, strength, and volume change characteristics of fine sand specimens reinforced by polymeric fibers made from carpet wastes. The variables are aspect ratio (length/width) and weight percentage of the fibers. The results indicate that the peak strength and total volume chan...

Comparison of dyeing of polyester fibers with natural dye and bio-mordant

In this study, dyeing of two regenerated polyester fibers, poly-trimethylene terephthalate (PTT) and poly-lactic acid (PLA), with natural dyes were compared with that of poly-ethylene terephthalate (PET) fiber. Lac was used as the primary natural colorant while Catechu was chosen as a natural color that can also act as a biomordant. The effects of temperature, initial pH of dye bath and dyeing ...

Enhancement of composite performance by hollow polyester fibers