Particle Behavior During the Arc Spraying Process with Cored Wires
نویسندگان
چکیده
منابع مشابه
Modeling of splat particle splashing data during thermal spraying with the Burr distribution
Splashing of splat particles is one of the most important phenomena in industrial processes such as thermal spray coating. The data relative to the degree of splashing of splats sprayed with a normal angle are commonly characterized by the Weibull distribution function. In this present study, an effort has been made to show that the Burr distribution is better than the Weibull distribution for ...
متن کاملconsequence analysis of the leakage, ignition and explosion during high pressure sour gas injection process to the oil reservoir
there is no doubt that human being needs to become integrated with industry and industry needs to be progressed, daily. on the other hand, serious events in industrial units specially in oil industries has been shown that such damages and events are industry related ones. the consequence of such events and damages which resulted in chemical and poisoned explosions and loss of life and property ...
EFFECT OF NOZZLE DIAMETER AND ATOMIZING AIR PRESSURE ON CHARACTERISTICS OF IN-FLIGHT PARTICLES IN WIRE ARC SPRAYING
In wire arc spraying, the atomizing air pressure and applied nozzle system are important factors influencing particles characteristics and coating quality. The aim of this paper is to study how the characteristics of particles such as size, velocity and temperature are influenced by the operating conditions in wire arc spray. For that, three types of wires are tested: solid wire of stainless st...
متن کاملLiquid metal flow behavior during vacuum consumable arc remelting process for titanium
125301-7474 IJET-IJENS @ February 2012 IJENS I J E N S Abstract—To better understand the vacuum arc remelting (VAR) process, a 3D finite element model is established to analyzing the electromagnetic, temperature and flow fields of titanium alloy ingot during steady state melting process using ANSYS software. The research results show that the current flows from the crucible to consumable electr...
متن کاملArc Spraying 3Cr13 Molten Drop Impact Stress Numerical Analysis
In the thermal spraying process, the process for the molten metal particles to hit against matrix to form coating experiences great change temperature. Since the coating materials has different thermal physical properties with the matrix materials, the residual stress is surely left in the coating. Much bigger residual stress not only restricts coating thickness but also primarily affects coati...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Thermal Spray Technology
سال: 2008
ISSN: 1059-9630,1544-1016
DOI: 10.1007/s11666-008-9288-8