Parametrical study of masonry walls subjected to in-plane loading through numerical modeling

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Limit states of modern unreinforced clay brick masonry walls subjected to in-plane loading

Recent research showed that the in-plane horizontal displacement capacity of unreinforced masonry (URM) walls depends on numerous factors that are not yet captured by current empirical drift capacity models; e.g., axial stress, shear span, geometry of the walls and the material used. In order to improve the performance-based assessment of URM wall buildings, future research should aim at develo...

متن کامل

A Study of the Progressive Degradation of Masonry Shear Walls Subjected to Harmonic Loading

This masonry research investigated the differences in the static and dynamic stiffness for the seismic range of loads and frequencies for a pressed clay masonry wythe. The effective stiffness has been defined in Newtonian physics and Damage Mechanics. This research used the concept of measured stiffness defined as the measured stress field divided by the measured strain field. A two-part test r...

متن کامل

Journal of Composites for Construction Design of FRP-Strengthened Infill Masonry Walls Subjected to Out-of-Plane Loading

4 FRP strengthening systems for infill masonry walls are typically designed to resist flexural stresses due to out-of5 plane pressure. Previous research has shown that there are potential premature failure mechanisms due to shear 6 sliding of the infill, which could reduce the effectiveness of the strengthening system. Current design guidelines for 7 strengthening of masonry walls with fiber-re...

متن کامل

Resistance of Concrete Masonry Walls with Membrane Catcher Systems Subjected to Blast Loading

This paper describes a methodology for analyzing the impulse pressure response of unreinforced concrete masonry walls that have been retrofitted with membranes that are not bonded to the masonry (catcher systems). Membrane catcher systems can be used to protect building occupants from secondary debris resulting from blast pressure, and the effectiveness of systems comprising polymers, composite...

متن کامل

Experimental Study of Masonry Structure Under Impact Loading and Comparing it with Numerical Modeling Results via Finite Element Model Updating

Given the sophisticated nature of the blast phenomenon in relation to structures, it is of significance to accurately investigate the structure behavior under blast loads. Due to its rapid and transient nature, blast loading is one of the most important dynamic loadings on the structures. Since masonry materials are widely used as the partition and bearing walls in the existing and newly-built ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Engineering Structures

سال: 2011

ISSN: 0141-0296

DOI: 10.1016/j.engstruct.2011.01.015