Parametric study on non‐ductile demountable shear connectors
نویسندگان
چکیده
منابع مشابه
Behavior of Tilted Angle Shear Connectors.
According to recent researches, angle shear connectors are appropriate to transfer longitudinal shear forces across the steel-concrete interface. Angle steel profile has been used in different positions as L-shaped or C-shaped shear connectors. The application of angle shear connectors in tilted positions is of interest in this study. This study investigates the behaviour of tilted-shaped angle...
متن کاملBehaviour of Corroded Single Stud Shear Connectors
In this study, the effect of corrosion on the static behavior of stud shear connectors was investigated. An innovative test setup for single stud shear connectors was designed and established. Two series of specimens having different stud diameters were fabricated and tested. The test specimens were firstly corroded to different corrosion rates by the electronic accelerating method. Static load...
متن کاملComparative study on two kinds of finite element analysis of PBL shear connectors
According to the different construction forms of PBL shear connectors in steel-concrete composite beam and steel-concrete joint section, eight finite element models in two groups of the two construction forms are conducted to study different mechanical properties of PBL shear connectors. Following conclusions can be drawn from the finite element method calculation results. The load-slip curve, ...
متن کاملExperimental Study on Mechanical Behavior of Shear Connectors of Square Concrete Filled Steel Tube
In order to quantitatively evaluate the shear-bearing capacity of shear connectors of square concrete filled steel tube (CFST), push-out tests on 14 square CFSTs with shear connectors have been carried out. Among the 14 CFSTs, there are 13 specimens with steel plate connectors and one specimen with steel bar connectors. The following factors are investigated to figure out their influences on th...
متن کاملBehaviour of Corroded Stud Shear Connectors under Fatigue Loading
Experimental investigation was conducted on corroded composite push-out specimens to study the behavior of shear studs subjected to fatigue loading. A total of eight standard EC4 push-out specimens were tested. The expected corrosion rate of test specimens ranged from 0 to 50%. The main purpose of these tests was to determine the fatigue life and the reduction effect caused by the corrosion on ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ce/papers
سال: 2019
ISSN: 2509-7075,2509-7075
DOI: 10.1002/cepa.1057