Parametric study on average stress-average strain curve of composite stiffened plates using progressive failure method
نویسندگان
چکیده
منابع مشابه
buckling of viscoelastic composite plates using the finite strip method
در سال های اخیر، تقاضای استفاده از تئوری خطی ویسکوالاستیسیته بیشتر شده است. با افزایش استفاده از کامپوزیت های پیشرفته در صنایع هوایی و همچنین استفاده روزافزون از مواد پلیمری، اهمیت روش های دقیق طراحی و تحلیل چنین ساختارهایی بیشتر شده است. این مواد جدید از خودشان رفتارهای مکانیکی ارائه می دهند که با تئوری های الاستیسیته و ویسکوزیته، نمی توان آن ها را توصیف کرد. این مواد، خواص ویسکوالاستیک دارند....
Average and Grain Specific Strain of a Composite under Stress Using Polychromatic Microbeam X-rays
Typically many grains are averaged to determine strains using X-ray diffraction. In a composite material, however, as the microstructure approaches the fiber diameter, approximations based on a few grains may be misleading. Polychromatic microbeam X-ray diffraction on beamline 7.3.3 at the Advanced Light Source was used to observe relative strain and orientation within hundreds of grains of a m...
متن کاملStress Intensity Factor of Radial Cracks for Rotating Disks and Cylinders using Average Stress Method
This article utilizes the average stress method to obtain the stress intensity factor of rotating solid and hollow disks/cylinders containing a radial crack. It is assumed that the cracks are located radially at center, internal or external radius of the geometry. Results are shown for both of the plane stress and plane strain assumptions and are validated against the known data introduce...
متن کاملLocal Behavior of Discretely Stiffened Composite Plates and Cylindrical Shells
The Layerwise Shell Theory is used to model discretely stiffened laminated composite plates and cylindrical shells for stress, vibration, pre-buckling and post-buckling analyses. The layerwise theory reduces a 3-D problem to a 2-D problem by expanding the 3-D displacement field as a function of a surface-wise 2-D displacement field and a 1-D interpolation polynomial through the shell thickness....
متن کاملCorrecting the stress-strain curve in hot compression test using finite element analysis and Taguchi method
In the hot compression test friction has a detrimental influence on the flow stress through the process and therefore, correcting the deformation curve for real behavior is very important for both researchers and engineers. In this study, a series of compression tests were simulated using Abaqus software. In this study, it has been employed the Taguchi method to design experiments by the factor...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Latin American Journal of Solids and Structures
سال: 2014
ISSN: 1679-7825
DOI: 10.1590/s1679-78252014001200005