Parametric Study of MIG Welding on Mild Steel (IS-2062 GRADE 2)
نویسندگان
چکیده
منابع مشابه
Parametric Optimization of TIG Welding on Stainless Steel (202) & Mild Steel by using Taguchi Method
The main objective of industries reveal with manufacturing better quality product at low cost and increase productivity. TIG welding is most vital and common operation use for joining of two similar or dissimilar parts with heating the material or applying the pressure by using the filler material for increasing productivity with less time and cost constrain. The TIG welding parameters are the ...
متن کاملEffect of Mig Welding Input Process Parameters on Weld Bead Geometry on Hsla Steel
The various welding parameters such as welding speed, voltage and gas flow rate were varied on HSLA steel and the effects of these parameters on weld bead geometry such as penetration, width & height have been studied. Mathematical equations have been developed using factorial technique. And the result of various effects are shown in tables. (Numerical Values). INTRODUCTION Wide variety of stee...
متن کاملBlue-light hazard from CO2 arc welding of mild steel.
OBJECTIVES The objective was to quantify the blue-light hazard from CO(2) arc welding of mild steel. METHODS The spectral radiance of arcs in CO(2) arc welding of mild steel was measured for solid and flux-cored wires at welding currents of 120-480 A. Effective blue-light radiance and the maximum acceptable exposure duration were calculated from the spectral radiance using their definitions i...
متن کاملOptimization of TIG-MIG hybrid welding of 316L austenitic stainless steel
In the TIG-MIG hybrid welding, higher weld efficiency and better weld quality are obtained with respect to each individual TIG and MIG welding methods. Moreover, in this method, the MIG arc is more stable in pure argon shielding gas. Therefore, in this study, the influence of TIG-MIG hybrid welding parameters on the welds appearance quality and welds depth to width ratio of a 316L austenitic st...
متن کاملOptimization of TIG-MIG hybrid welding of 316L austenitic stainless steel
In the TIG-MIG hybrid welding, higher weld efficiency and better weld quality are obtained with respect to each individual TIG and MIG welding methods. Moreover, in this method, the MIG arc is more stable in pure argon shielding gas. Therefore, in this study, the influence of TIG-MIG hybrid welding parameters on the welds appearance quality and welds depth to width ratio of a 316L austenitic st...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Innovative Research in Physics
سال: 2019
ISSN: 2689-484X
DOI: 10.15864/ijiip.1106