Parametric Studies Of Failure Mechanisms In Thermal Barrier Coatings During Thermal Cycling Using FEM

Failure Mechanisms Investigation in Thermal Barrier Coatings under Isothermal and Non-sothermal Fatigue Loadings using Design of Experiments

In this article, failure and fracture mechanisms in an aluminum alloy (which has been used in diesel internal combustion engines), with and without ceramic thermal barrier coatings, have been investigated under isothermal and non-isothermal fatigue loadings. In this research, the base material is an aluminum-silicon-magnesium alloy and the thermal barrier coating includes a metallic bond coat l...

failure mechanisms investigation in thermal barrier coatings under isothermal and non-sothermal fatigue loadings using design of experiments

in this article, failure and fracture mechanisms in an aluminum alloy (which has been used in diesel internal combustion engines), with and without ceramic thermal barrier coatings, have been investigated under isothermal and non-isothermal fatigue loadings. in this research, the base material is an aluminum-silicon-magnesium alloy and the thermal barrier coating includes a metallic bond coat l...

Failure analysis of suspension plasma sprayed thermal barrier coatings

Mechanisms governing the high temperature erosion of thermal barrier coatings

The impact of thermal barrier coatings by hard projectiles at high temperature has been analyzed. Three different domains have been explored: each differentiated by particle size, velocity, temperature and TBC composition. Domain I applies when the projectile creates deeply penetrating plastic/densification zones. In this case, short time elastic effects are relatively unimportant. The response...

Microstructural investigations of EBPVD thermal barrier coatings

This paper deals with the morphology, constitutive phases and fine microstructures of some EBPVD processed yttria partially stabilized zirconia thermal barrier coatings. This study has been performed by X-ray diffraction and scanning and transmission electron microscopy. It was shown that the coatings studied were constituted of a single metastable tetragonal t' phase, as expected if one refers...