Parametric Optimization on Multi-Objective Precision Turning Using Grey Relational Analysis
نویسندگان
چکیده
منابع مشابه
Multi-objective optimization in Turning of EN31 steel using Taguchi based grey relational analysis
Machining can be outlined as the process of taking away material from a work piece in the grade of chips. During a machining process, isolated of the energy is turned into heat energy through the detritions yielded between the tool and the work piece and the plastic deformation of the work material in the machining zone. Turning is charmed by several constituents, for example, the cutting speed...
متن کاملOptimizing turning operation of St37 steel using grey relational analysis
Nowadays, in order to reach minimum production cost in machining operations, various optimization methods have been proposed. Since turning operation has different parameters affecting the workpiece quality, it was selected as a complicated manufacturing method in this paper. To reach sufficient quality, all influencing parameters such as cutting speed, federate, depth of cut and tool rake angl...
متن کاملMulti-objective optimization in WEDM of D3 tool steel using integrated approach of Taguchi method & Grey relational analysis
In this paper, wire electrical discharge machining of D3 tool steel is studied. Influence of pulse-on time, pulse-off time, peak current and wire speed are investigated for MRR, dimensional deviation, gap current and machining time, during intricate machining of D3 tool steel. Taguchi method is used for single characteristics optimization and to optimize all four process parameters simultaneous...
متن کاملGrey Relational Analyses for Multi-Objective Optimization of Turning S45C Carbon Steel
The optimization of performance characteristics in turning process can be achieved through selection of proper machining parameters. It is well known that many researchers have successfully reported the optimization of single performance characteristic. Nevertheless, the multi-objective optimization can be difficult and challenging to be studied due to its complexity in analysis. This is becaus...
متن کاملParametric Optimization on single objective Dry Turning using Taguchi Method
ABSTRACT The objective of this investigation is to obtain an optimal setting of process parameters in turning for maximizing the material removal rate of the manufactured component. The material removal rate has been investigated in this analysis while machining practically used components. As per Taguchi’s “Design of Experiments”, the number of experiments to be conducted in this analysis is c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Information Technology Journal
سال: 2008
ISSN: 1812-5638
DOI: 10.3923/itj.2008.1072.1076