Parametric Optimization of Mass Deposition of Electroless Ni-W-P Coating Using Central Composite Design
نویسندگان
چکیده
In this study we consider copper sample as a substrate under which the Electroless Ni-W-P coatings were established and successfully deposited. The three factor was taken into consideration, i.e. concentration of Nickel Sulphate, Sodium Hypophosphite Tungstate Dihydrate. Central Composite Design modelling done with help total 20 runs that conducted in design, mass deposition per unit area response parameter. optimized evaluated from Experiments based on design. From where examined individual levels coatings, ANOVA, Examination Normal Plot Residual, Predicted Actual plot Second order 3-D Contour showing interaction for Response Surface Mass Deposition Unit Area.It found as-coated value has significant process parameters, is linear nature it highest 134.055×10-4 gm/cm2.
منابع مشابه
Electroless Ni–P composite coatings
This review outlines the development of electroless Ni–P composite coatings. It highlights the method of formation, mechanism of particle incorporation, factors influencing particle incorporation, effect of particle incorporation on the structure, hardness, friction, wear and abrasion resistance, corrosion resistance, high temperature oxidation resistance of electroless Ni–P composite coatings ...
متن کاملWear Performance Optimization of Electroless Ni-B Coating Using Taguchi Design of Experiments
The present study outlines the use of Taguchi parameter design to minimize the wear performance of electroless Ni-B coating by optimizing the tribological testing parameters. The tests are carried out in a multitribotester and the three parameters viz. load (L), speed (S) and time (T) are considered with three levels each. An L27 array is used to accommodate the three factors as well as their i...
متن کاملNi-B Coating Production on Magnesium Alloy by Electroless Deposition
The use of magnesium alloys is limited due to their susceptibility to corrosion although they have many attractive physical and mechanical properties. To increase mechanical and corrosion properties of these alloys, many deposition method and coating types are used. Electroless Ni–B coatings have received considerable interest recently due to its unique properties such as cost-effectiveness, th...
متن کاملoptimization of preliminary treatment on the surface of boron nitride particles for ni-p electroless coating
applying a ni-p electroless coat on the surface of bn(h) particles has a beneficial effect on their wettability in vortex technique during composite manufacturing. in this investigation, different preliminary treatments consisting of different combinations of surface oxidation, sensitization and activation have been investigated. the results obtained from scanning electron microscope (sem) and ...
متن کاملOptimization of electroless Ni–Zn–P deposition process: experimental study and mathematical modeling
A mathematical model based on mixed potential theory was developed which was used to optimize a non-anomalous Ni–Zn–P electroless deposition process developed by us at USC. The model was developed by assuming an adsorption step in addition to the electrochemical steps. The concentrations of the Zn and Ni complex were estimated by solving the material balances in addition to the electroneutralit...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in transdisciplinary engineering
سال: 2022
ISSN: ['2352-751X', '2352-7528']
DOI: https://doi.org/10.3233/atde220810