Parametric Optimization of Ball Burnishing Process Parameter for Hardness of Aluminum Alloy 6061
نویسندگان
چکیده
منابع مشابه
Analysis of Surface Roughness and Micro-hardness in Roller Burnishing of Aluminum Alloy 6061
Burnishing is a chip-less finishing process, in which a hard roller or ball presses the surface layer of part to perform plastic deformation in the surface layer and produce improved finish, enhanced hardness and compressive residual stresses on the surface of special materials such as Aluminum and Brass. In the following research, the effect of input parameters such as feed rate, cutting speed...
متن کاملWelding Aluminum Alloy 6061 with Opposing Dual Torch Gtaw Process
Cracking is a major concern in welding aluminum alloys. Although weld solidification cracks can be eliminated through addition of filler alloy, the additives modify the alloy or base-metal constituents and may not always be desirable. High-energy beam processes, such as electron-beam welding, that result in minimal heat input reduce crack sensitivity, but their high cost limits their applicatio...
متن کاملOptimization and utilization of semisolid casting process for semisolid welding of Al-6061 alloy
Semisolid processing is one of the modern routes in sound and near net shape parts production. Preparation of semisolid slurry using a cooling slope is increasingly becoming popular, primarily because of its simplicity in design and ease of control of the process. In this research, the microstructures of Al6061 semisolid alloy cast via a miniature cooling slope were investigated. The propertie...
متن کاملThe Parameters Investigation and Hardness Optimization of A380 Aluminum Alloy produced by Mechanical Vibrator
The use of aluminum alloys in various industries, especially the automotive industries, to have less structural weight, is on the rise. The use of semi-solid forming process in addition to changes in the microstructure which improves the mechanical properties can reduce the volume of production and ultimately lead to the improvement of the structural weight. In this paper, optimization of the g...
متن کاملImproved Microstructure and Properties of 6061 Aluminum Alloy Weldments Using a Double-Sided Arc Welding Process
Due to its popularity and high crack sensitivity, 6061 aluminum alloy was selected as a test material for the newly developed double-sided arc welding (DSAW) process. The microstructure, crack sensitivity, and porosity of DSAW weldments were studied systematically. The percentage of fine equiaxed grains in the fully penetrated welds is greatly increased. Residual stresses are reduced. Porosity ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOSR Journal of Engineering
سال: 2014
ISSN: 2278-8719,2250-3021
DOI: 10.9790/3021-04822126