Parametric investigation on mixing in a micromixer with two-layer crossing channels

Parametric investigation on mixing in a micromixer with two-layer crossing channels

This work presents a parametric investigation on flow and mixing in a chaotic micromixer consisting of two-layer crossing channels proposed by Xia et al. (Lab Chip 5: 748-755, 2005). The flow and mixing performance were numerically analyzed using commercially available software ANSYS CFX-15.0, which solves the Navier-Stokes and mass conservation equations with a diffusion-convection model in a ...

Experimental Investigation of Mixing in a rectangular cross-section Micromixer

An ultrashort mixing length micromixer: the shear superposition micromixer.

We report for the first time a laminar high-performance continuous micromixing process of two fluids over a length of 200 microns in under 10 milliseconds achieved by an optimization of the control parameters amplitude and frequency in the mixing device denoted as 'Shear Superposition Micromixer'. We improve mixing time by approximately 5 orders of magnitude over diffusion-limited mixing. The d...

Mixing Analysis of Passive Micromixer with Unbalanced Three-Split Rhombic Sub-Channels

A micromixer with unbalanced three-split rhombic sub-channels was proposed, and analyses of the mixing and flow characteristics of this micromixer were performed in this work. Three-dimensional Navier-Stokes equations in combination with an advection-diffusion model with two working fluids (water and ethanol) were solved for the analysis. The mixing index and pressure drop were evaluated and co...

The effect of flow parameters on mixing degree of a three dimensional rhombus micromixer with obstacles in the middle of the mixing channel using oscillatory inlet velocities

The previous studies of authors on passive micromixers indicated that the micromixers dividing the flow to several layers, such as rhombus micromixers and micromixers with obstacles in the middle of the mixing channel, have higher mixing degree than other types. Also, using of oscillatory inlet velocities is an active method to enhance the mixing efficiency of micromixers. Therefore, in this st...