Parametric Hull Form Optimization of Containerships for Minimum Resistance in Calm Water and in Waves
نویسندگان
چکیده
Abstract This paper described the process of generating optimal parametric hull shape with a fully modeling method for three containerships different sizes. The newly created ship was applied to another similar shape, which greatly saved time cost. A selecting design variables developed, and during this process, influence these on calm water resistance analyzed. After we obtained hulls, wave added motions original hulls in regular head waves were analyzed compared experimental results. Computations flow around from validated nonlinear potential boundary element method. Using multi-objective optimization algorithm, surrogate-based global (SBGO) reduced computational effort. Compared hull, significantly two larger ships at Froude numbers corresponding their speeds. Optimizing slightly total waves, while hardly affected wave-induced motions.
منابع مشابه
Hull-form optimization in calm and rough water
The paper presents a formal methodology for the hull form optimization in calm and rough water using wash waves and selected dynamic responses, respectively. Parametric hull form modeling is used to generate the variant hull forms with some of the form parameters modified, which are evaluated in the optimization scheme based on evolutionary strategies. Rankine-source panel method and strip theo...
متن کاملNumerical Modeling of the Stepped Planing Hull in Calm Water
This article describes a 3D CFD (computational fluid dynamics) simulation implementation of the stepped planning hull in calm water. The turbulent free surface flow around the stepped planing hull is computed with a RANSE method, using the solver ANSYS-CFX. The turbulence model used is standard k–ε. In order to simulate the disturbed free surface, VOF model is implemented. The CFD model has bee...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
economic optimization and energy consumption in tray dryers
دراین پروژه به بررسی مدل سازی خشک کردن مواد غذایی با استفاده از هوای خشک در خشک کن آزمایشگاهی نوع سینی دار پرداخته شده است. برای آنالیز انتقال رطوبت در طی خشک شدن به طریق جابجایی، یک مدل لایه نازک برای انتقال رطوبت، مبتنی بر معادله نفوذ فیک در نظر گفته شده است که شامل انتقال همزمان جرم و انرژی بین فاز جامد و گاز می باشد. پروفایل دما و رطوبت برای سه نوع ماده غذایی شامل سیب زمینی، سیب و موز در طی...
15 صفحه اولdevelopment and implementation of an optimized control strategy for induction machine in an electric vehicle
in the area of automotive engineering there is a tendency to more electrification of power train. in this work control of an induction machine for the application of electric vehicle is investigated. through the changing operating point of the machine, adapting the rotor magnetization current seems to be useful to increase the machines efficiency. in the literature there are many approaches wh...
15 صفحه اولذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Marine Science and Application
سال: 2021
ISSN: ['1671-9433', '1993-5048']
DOI: https://doi.org/10.1007/s11804-021-00243-w