Parametric Evaluation of the Flow Boiling Heat Transfer Properties of R22 and R407c inside Horizontal Microfin Tube
نویسندگان
چکیده
The flow boiling heat transfer performance of R22 and R407c, in a microfin tube with helix angle 22° an apex 48°, was evaluated study. study is aimed at investigating the impact flux, mass saturation temperature, vapor quality on coefficient during boiling. Two different temperatures, 293.15 K 313.15 K, were used experiments, fluxes ranging from 25 to 85 kW.m-2 150 350 kg.m-2.s-1. To validate experimental data, results compared existing correlations for tubes. calculated error margin among all dataset, which ±15% ±30%, also matched by 85% 95% datasets, respectively. Findings reveal that lower average coefficients augmented increasing flux. found has higher than R407c low temperatures due its stronger thermal conductivity viscosity.
منابع مشابه
Evaluation of Correlations of Flow Boiling Heat Transfer of R22 in Horizontal Channels
The calculation of two-phase flow boiling heat transfer of R22 in channels is required in a variety of applications, such as chemical process cooling systems, refrigeration, and air conditioning. A number of correlations for flow boiling heat transfer in channels have been proposed. This work evaluates the existing correlations for flow boiling heat transfer coefficient with 1669 experimental d...
متن کاملNumerical Investigation of Flow behavior and Heat Transfer Characteristics inside Herringbone Microfin Tube
A numerical investigation is carried out for single phase flow behavior and heat transfer characteristics inside herringbone microfin tube by using a commercial CFD code FLUENT. It solves the three-dimensional NavierStokes equations in strong conservation form. Turbulence closure is provided by the standard k- turbulent model with enhance wall treatment. Numerical results showed that herringbo...
متن کاملEnhancement Effect of a Microfin Tube in Condensation of R407C
In the present paper the heat exchange performance of a counter flow double-tube condenser for a ternary refrigerant mixture R407C, composed ofHFC32/HFC125/HFC134a, is calculated using a prediction method developed by the present authors. The axial distributions of vapor and liquid bulk mass fraction, temperature, heat flux, mass flux, etc., are obtained for both a smooth tube and a microfin tu...
متن کاملA General Correlation for Saturated Two-Phase Flow Boiling Heat Transfer Inside Horizontal and Vertical Tubes
A simple correlation was developed earlier by Kandlikar (1983) for predicting saturated flow boiling heat transfer coefficients inside horizontal and vertical tubes. It was based on a model utilizing the contributions due to nucleate boiling and convective mechanisms. It incorporated a fluid-dependent parameter Ffl in the nucleate boiling term. The predictive ability of the correlation for diff...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Energy Research
سال: 2023
ISSN: ['0363-907X', '1099-114X']
DOI: https://doi.org/10.1155/2023/8882662