Parametric behaviour beam-to-column composite connection using CFS section
نویسندگان
چکیده
منابع مشابه
Performance of the Modified Precast Beam to Column Connection Placed on a Concrete Corbel
Precast concrete structures in Iran are generally designed as continuous columns with hinged beams, thereby making them simple frames. In this system in site show walls in two directions of buildings guaranteed lateral resisting system. However, in order to obtain a seismic resisting frame, the connection between beam and column should be moment resisting and ductile, allowing the formation of ...
متن کاملFinite element analysis of a rigid beam to column connection reinforced with channels
Abstract: This research work presents a new rigid connection constructed with channels. In order to assess its hysteresis behavior, three specimens with different cover plates and six specimens with different panel zone thickness have been considered. The energy absorbed by the connection and the behavior of the panel zone were studied during cyclic loading and compared with those of connectio...
متن کاملDamage Avoidance Design Steel Beam-Column Moment Connection Using High-Force-To-Volume Dissipators
Existing welded steel moment frames are designed to tolerate substantial yielding and plastic rotation under earthquake loads. This sacrificial design approach can lead to permanent, and often irreparable damage when interstory drifts exceed 2%. The experimental seismic performance of a 50% full-scale damage avoidance designed structural steel beam-column connection is presented. The beamcolumn...
متن کاملBehaviour of a Timber-Concrete Composite Beam with Glued Connection at Strength Limit State
The paper reports the results of a collapse test performed on a 6 m span timber-concrete composite beam with glued re-bar connection. The beam was first ramp loaded to failure, then some push-out tests were performed on specimens cut from the end of the beam in order to fully characterise the connection. During the tests all relevant quantities such as deflections, slips and strains were monito...
متن کاملVibration analysis of a rotating closed section composite Timoshenko beam by using differential transform method
This study introduces the Differential Transform Method (DTM) in the analysis of the free vibration response of a rotating closed section composite, Timoshenko beam, which features material coupling between flapwise bending and torsional vibrations due to ply orientation. The governing differential equations of motion are derived using Hamilton’s principle and solved by applying DTM. The natura...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International journal of advanced technology and engineering exploration
سال: 2022
ISSN: ['2394-5443', '2394-7454']
DOI: https://doi.org/10.19101/ijatee.2021.875961