Parametric Analysis of Electrochemical Discharge Drilling on Soda-Lime Glass Material Using Taguchi L27 Orthogonal Array Method
نویسندگان
چکیده
منابع مشابه
Parametric Analysis of Electrochemical Discharge Micro-Machining Process during Profile Generation on Glass
Electrochemical discharge micro-machining (micro-ECDM) has the ability to machine electrically nonconducting materials as compared with different existing traditional and also non-traditional machining processes. This paper deals with the effects of different process parameters like applied voltage (V), electrolyte concentrations(wt%), pulse frequency and duty ratio on different machining perfo...
متن کاملNumerical Simulation of Soda-Lime Silicate Glass Tempering
The paper deals with the computation of residual and transient stresses in a tempered glass plate. The modelling takes into account the viscoelastic behavior and the structural relaxation of glass. The evolution of stresses with time during the rapid cooling is computed. Simulation results are compared with experimental ones from the literature available. Levels of transient tensile stress in t...
متن کاملSurface Analysis of Stressed and Control Tin Oxide Thin Films on Soda Lime Glass
Surface analysis techniques have been used to investigate tin oxide-coated soda lime glass specimens prior and subsequent to their exposure to DC bias, heat, and humidity. All specimens reported here comprise the following layered structure: tin oxide/silicon oxycarbide/glass. Depth profiling using X-ray photoelectron spectroscopy (XPS) clearly shows the interfacial regions in both control samp...
متن کاملResidual stresses in a soda-lime-silica glass-ceramic
The present study was undertaken to test the validity of existing models for: (i) the residual internal stresses which arise due to thermal and elastic mismatch in duplex systems; and (ii) the critical particle diameter for spontaneous cracking. The specimens studied were bulk nucleated, partially crystallized 17.20Na,0-32.09Ca0-4.12Si0,-2.59P,O, (mol%) glasses. The residual stress was determin...
متن کاملParametric Optimization on single objective Dry Turning using Taguchi Method
ABSTRACT The objective of this investigation is to obtain an optimal setting of process parameters in turning for maximizing the material removal rate of the manufactured component. The material removal rate has been investigated in this analysis while machining practically used components. As per Taguchi’s “Design of Experiments”, the number of experiments to be conducted in this analysis is c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Strojnícky časopis - Journal of Mechanical Engineering
سال: 2019
ISSN: 2450-5471
DOI: 10.2478/scjme-2019-0047