PARAMETRIC ANALYSIS AND MULTI OBJECTIVE OPTIMIZATION OF CUTTING PARAMETERS IN TURNING OPERATION OF AISI 4340 ALLOY STEEL WITH CVD CUTTING TOOL

Surface Roughness, Machining Force and FlankWear in Turning of Hardened AISI 4340 Steel with Coated Carbide Insert: Cutting Parameters Effects

The current experimental study is to investigate the effects of process parameters (cutting speed, feed rate and depth of cut) on performance characteristics (surface roughness, machining force and flank wear) in hard turning of AISI 4340 steel with multilayer CVD (TiN/TiCN/Al2O3) coated carbide insert. Combined effects of cutting parameter (v, f, d) on performance outputs (Ra, Fm and VB) ar...

Multi Objective Optimization of Cutting Parameters in Turning Operation to Reduce Surface Roughness and Cutting Forces

Analysis of effect of Minimum Quantity Lubrication on different machining parameters Cutting Force, Surface Roughness and Tool Wear by Hard Turning of AISI-4340 Alloy Steel a Review

This paper deals with the study of various machining process and show the effect of different cutting parameters on the properties of material. There are several important factors in the product quality which are surface finish, cutting temperature, tool life and coolant quality. The use of coolant generally causes life of tools and it also maintains work piece surface properties without damage...

Design optimization of cutting parameters for turning of AISI 304 austenitic stainless steel using Taguchi method

In the present work Taguchi method is used to optimize cutting parameters during dry turning of AISI 304 austenitic stainless steel with AlTiCrN coated tool. The coating was deposited on fine-grained K-grade (ISO K-20) cemented carbide cutting insert using physical vapor deposition (PVD) technique. The turning parameters evaluated are cutting speed of 200 and 260 m/min, feed rate of 0.20 and 0....

Optimization of Cutting Parameters on Tool Wear and Workpiece Surface Temperature in Turning of Aisi D2 Steel

A R T I C L E I N F O AISI D2 steel, Tool wear, Workpiece surface temperature, Taguchi method, Regression analysis. Received 19 July 2012 Accepted 29 August 2012 Available online 31 December 2012 Now-a-days increasing the productivity and the quality of the machined parts are the main challenges of metal cutting industry during turning processes. Optimization methods in turning processes, consi...