Parameters Optimization in Friction Surfacing
نویسندگان
چکیده
منابع مشابه
Process parameters selection for friction surfacing applications using intelligent decision support
Friction surfacing is an advanced manufacturing process, which has been successfully developed and commercialised over the past decade. The process is used for corrosion and wear resistant coatings and for reclamation of worn engineering components. At present the selection of process parameters for new coating materials or substrate geometries is by experiment requiring lengthy development wor...
متن کاملOptimization of friction welding parameters using simulated annealing
Friction welding is a solid state bonding technique which utilizes the heat generated by rubbing of two faying surfaces for the coalescence of material. Friction welding process is normally considered as a multi-input and multi-output process. Optimization of friction welding parameters is required to get good quality joints. Present study establishes the relationship between the input variable...
متن کاملOptimization of friction stir welding parameters for toughness in super duplex stainless steel
In this paper, using the Taguchi method, the parameters affecting the toughness of super duplex stainless steels in friction stir welding were optimized. In order to achieve optimal conditions, maximum toughness, the quality characteristic was used as the higher the better. Analysis of Taguchi results showed that in order to achieve optimal conditions in super duplex stainless steel weldments m...
متن کاملOptimization of friction stir welding parameters for toughness in super duplex stainless steel
In this paper, using the Taguchi method, the parameters affecting the toughness of super duplex stainless steels in friction stir welding were optimized. In order to achieve optimal conditions, maximum toughness, the quality characteristic was used as the higher the better. Analysis of Taguchi results showed that in order to achieve optimal conditions in super duplex stainless steel weldments m...
متن کاملOptimization of the parameters of low-carbon steel (EN10130) welding using friction stir welding method
Friction-stir welding process is a novel method of solid state welding, which produces heat due to friction between the pin, the shoulder and the workpiece. This heat causes a paste area. Shoulder pressure and pin spin cause edges integration and lead to welding. In this study, firstly, the feasibility of welding of steel sheet (EN10130) with a thickness of 1.5mm has been tested by 58 experim...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Chemical and Materials Engineering
سال: 2014
ISSN: 2332-1032,2332-1067
DOI: 10.13189/cme.2014.020601