PARAMETERS EFFECTING FORCED VORTEX FORMATION IN BLADE PASSAGEWAY OF DYNAMIC AIR CLASSIFIER
نویسندگان
چکیده
منابع مشابه
Effect of Blade Design Parameters on Air Flow through an Axial Fan
The objective of this paper is the numerical study of the flow through an axial fan and examining the effects of blade design parameters on the performance of the fan. The axial fan is extensively used for cooling of the electronic devices and servers. Simulation of the three-dimensional incompressible turbulent flow was conducted by numerical solution of the (RANS) equations for a model. The S...
متن کاملsuppression of coke formation in thermal cracking by coke inhibitors
the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...
15 صفحه اولParameters Effecting 2D Barcode Scanning Reliability
This paper describes a case study to identify the various parameters that affect the scanning reliability of 2D barcodes for high content density applications. A review of the numerous options for 2D symbologies showed that, in theory, these symbologies are capable of encoding relatively large amounts of data, but in practice, barcode scan-ability decreases as the encoded content increases. Wit...
متن کاملFeedback attenuation and adaptive cancellation of blade vortex interaction on a helicopter blade element
Blade vortex interaction (BVI) noise has been recognized as the primary determinant of the helicopter’s far field acoustic signature. Given the limitations of design in eliminating this dynamic phenomenon, there exists a need for control. We believe that this paper is the first model-based effort to attempt the same. We present herein the application, first of feedback control strategies, and t...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Polytechnica
سال: 2017
ISSN: 1805-2363,1210-2709
DOI: 10.14311/ap.2017.57.0304