Parameter effect quantification for a phase change material-based lithium-ion battery thermal management system
نویسندگان
چکیده
The influence of discharge rate, ambient temperature, and phase change material on the maximum temperature highest difference was investigated. battery tested with without under extreme rates (4C 5C) temperatures (310 K 320 K). Results showed that a reduced from 327.94 to 306.45 for 14.6 Ah lithium-ion discharged at 5C-rate K. Quantitatively determined parameter effects revealed PCM considerably had remarkable compared rate temperature. Moreover, approximately 2.5 times greater than C-rate, while 50 C-rate. quantified can be used improve material-battery cooling system.
منابع مشابه
Performance Results for a Universal Lithium Ion Battery Management System
The advantages of lithium-based batteries over lead acid batteries have created great interest in developing safe and cost effective drop-in replacements. To achieve the required cost effectiveness and safety of the battery, Battery Management Systems (BMS) are critical to avoid over-charging, over-discharging, and continuously and accurately determining the State of Charge (SOC), State of Heal...
متن کاملMicrometric Growth of V2O5Hexagonal Nano-plates as an Active Material for Lithium Ion Battery Cathode Electrode
This manuscript reports the synthesis of V2O5 nanostructures using reflux method, without using additives such as surface reactants. The influence of reaction parameters like temperature and concentration on the growth of nanostructures have been investigated. It has been observed that the nanostructures are formed with a hexagonal nano-plate morphology, grown from a common core. The diameter o...
متن کاملAn Advanced Battery Management System for Lithium Ion Batteries
This paper describes the development of a Battery Management System (BMS) State of Charge/Health (SOC/SOH) algorithm that was developed and proven for three different lithium ion based cell chemistries (nanophosphate, lithium manganese oxide, lithium iron phosphate). In addition, a universal BMS architecture based on this algorithm was developed that can support other chemistries, capacities, a...
متن کاملThermal behavior of a commercial prismatic Lithium-ion battery cell applied in electric vehicles
This paper mainly discusses the thermal behavior and performance of Lithium-ion batteries utilized in hybrid electric vehicles (HEVs), battery electric vehicles (BEVs) and fuel cell electric vehicles (FCEVs) based on numerical simulations. In this work, the battery’s thermal behavior is investigated at different C-rates and also contour plots of phase potential for both tabs and volume-mo...
متن کاملEffect of entropy change of lithium intercalation in cathodes and anodes on Li-ion battery thermal management
The entropy changes ( S) in various cathode and anodematerials, as well as in complete Li-ion batteries, were measured using an electrochemical thermodynamic measurement system (ETMS). LiCoO2 has a much larger entropy change than electrodes based on LiNixCoyMnzO2 and LiFePO4, while lithium titanate based anodes have lower entropy change compared to graphite anodes. The reversible heat generatio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Turkish Journal of Chemistry
سال: 2022
ISSN: ['1300-0527', '1303-6130']
DOI: https://doi.org/10.55730/1300-0527.3465