Parallelly Aligned, Activated Carbon Coated Plates Operating as Adsorption Columns for Removing VOCs

نویسندگان

چکیده

A semi‒pilot-scale adsorption reactor was fabricated to remove a volatile organic compound (VOC) gases mixture (BTEX). Activated carbon (AC) immobilized by coating it on stainless steel plates using polyvinyl acetate (PVA) binder, and the open-pore structure maintained after process. Parallelly aligned coated with AC minimized decrease in pressure inducing smooth fluid flow high removal efficiency even at linear velocity. The order of capacities for was: xylene > ethyl benzene toluene benzene, which due their differences hydrophobicity molecular weight. adsorption-desorption process performed five successive cycles. evidently same all cycles, makes this sustainable one.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Removing Undesirable Vocs from Biogases Using the Electrochemical Swing Adsorption onto Activated Carbon Fiber Cloths

Introduction The development of alternative and renewable energies is one of the crucial opportunities exhibited by governments to remediate the diminishing resources of the fossil feedstock. Biogases collected from landfill, digester and wastewater plants constitute a large and disposable supply to produce a rich methane stream, though these resources remain mostly unused. The biogas should be...

متن کامل

Adsorption capacity of activated carbon for n-alkane VOCs

The volatile organic compounds (VOCs) in the indoor air come from many sources including building materials, furnishings, occupant activities and in some cases, the ventilation air. Granular activated carbons (GAC) have been increasingly used to remove these contaminants, particularly for small commercial buildings and those located in urban centers or near industrial plants where the quality o...

متن کامل

Comparison of Adsorption Characteristics for VOCs on Activated Carbon and Oxidized Activated Carbon

In this investigation, the selected activated carbon is treated in NaOH solution or gas fluid with ozone from an ozone generator. FTIR, BET specific surface area and element analysis instruments were used to identify the difference in the chemical and physical characteristics between the activated carbon and oxidized activated carbon. The system of adsorption apparatus consists of a fixed adsor...

متن کامل

Hydrogen Adsorption on Activated Carbon

The adsorption of hydrogen on carbon nanotubes and activated carbons has generated considerable interest in relation to hydrogen storage for fuel cells applications[1-3]. However, the widespread use of hydrogen as a fuel is limited by the lack of a convenient and cost-effective method of hydrogen storage. Adsorption of supercritical hydrogen is limited by the low interaction energy between hydr...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Aerosol and Air Quality Research

سال: 2022

ISSN: ['2071-1409', '1680-8584']

DOI: https://doi.org/10.4209/aaqr.210263