Parallel robot design incorporating a direct end effector sensing system
نویسندگان
چکیده
منابع مشابه
End-Effector Guidance of Robot Arms
This ?aper deals with a robotic system in which the end-point is directly controlled. It consists of a remote guidance subsystem and a manipulator with an end-of-arm sensor subsystem. The guisance subsystem transmits and manipulates a laser beam in space, and the sensor detects the beam, sends the information to the robot controller, which, in turn, instructs the manipulator to follow the beam....
متن کاملEnd-effector for Fast Wire Cutting and Crimping on a 4-dof Parallel Robot
This article describes the development of compact and efficient tools exploited by a 4-DOF robot during an automated process aimed at building heating coils. Resistive wires must be cut and crimped into small connectors at a fast pace, with extreme repeatability and reliability. We designed two special tools for the end effector of a parallel-kinematic robotic device. Wire cutting has been obta...
متن کاملDesign of a Robot End-Effector Grabbing Mechanism Based on a Bionic Snake Mouth
Inspired by the bite and swallowing function of a snake’s mouth, a robot end‐effector grabbing mechanism was designed. The grabbing movement is realized by the ‘bite’ function of the bionic snake mouth actuator, and the ‘swallowing’ function insures a continuous grip on the object. To implement the continuous grip function of the new robot end‐effector, the c...
متن کاملBlind compressive sensing formulation incorporating metadata for recommender system design
This is anOpenAccess article, distributed under the terms of theCreativeCommonsAttribution-NonCommercial-ShareAlike licence (http://creativecommons.org/licenses/bync-sa/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the same Creative Commons licence is included and the original work is properly cited. The written permission of Cambridge Univer...
متن کاملThe Control of a Robot End-effector Using Photogrammetry
Most robots rely upon their rigidity to perform tasks. In the automotive industry the accuracy requirement for operations such as spot welding will be of the order of a millimetre. The aerospace industry provides a challenging environment to apply robotics in that the accuracy requirements are at least a factor of ten to twenty higher. Conventional robots are not capable of achieving this accur...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Intelligent Systems Technologies and Applications
سال: 2008
ISSN: 1740-8865,1740-8873
DOI: 10.1504/ijista.2008.017279