Paint Film Formation Process in Spray Coating

Automotive Spray Paint Simulation

A system is introduced for the simulation of spray painting. Head mounted display goggles are combined with a tracking system to allow users to paint a virtual surface with a spray gun. Ray tracing is used to simulate droplets landing on the surface of the object, allowing arbitrary shapes and spray gun patterns to be used. This system is combined with previous research on spray gun characteris...

Numerical (CFD) Analysis of Thermal Spray Coating Process

Numerical Simulation of Film Formation in Tablet Coating

The application of a coating layer on a tablet is a commonly used technique to selectively control tablet characteristics. Among the most important functions of the coating is the regulation of the release of active ingredient. In the course of a typical coating process, the tablet passes a spray zone multiple times. Each time, a partial coating layer is applied. For each tablet, this is repeat...

An Optimization Of Spray Coating Process To Minimize Coating Material Consumption

In cookware industry, interior spray coating process is an important process to protect the cookware product from the corrosion. In this process, the coating material “TEFLON” is used to spray to cover all the part’s surface. If a pot or pan is not too deep, one spray gun is enough to spray to cover all the interior surface. However, for the high side-wall pot, two spray guns must be used to sp...

Influence of Film Coating Process Parameters on the Gloss of Tablets Coated with Pigmented Aqueous Film Coating Formulations

Opadry® II 1 Influence of Film Coating Process Parameters on the Gloss of Tablets Coated with Pigmented Aqueous Film Coating Formulations PURPOSE A common practice for enhancing the gloss of coated tablets is the application of a clear top-coat after applying a pigmented coating layer. In a recent study, substantial increases in tablet gloss were achieved using this multiple step approach.1 It ...