Pack-boriding of low alloy steel: microstructure evolution and migration behaviour of alloying elements

Evaluation of microstructure and mechanical properties of 410NiMo as an overlay layer on low alloy steel

The aim of this study is to reach an increased service life for parts using in sour environment by weld overlaying process. In this investigation, two successive layers of ER410NiMo were clad on low alloy steel substrates. To reduce the likelihood of Hydrogen Induced Cracking (HIC) and producing stable hydrogen traps, Post Weld Heat Treatment (PWHT) was conducted. Microstructural analysis, X-ra...

Evaluation of microstructure and mechanical properties of 410NiMo as an overlay layer on low alloy steel

The aim of this study is to reach an increased service life for parts using in sour environment by weld overlaying process. In this investigation, two successive layers of ER410NiMo were clad on low alloy steel substrates. To reduce the likelihood of Hydrogen Induced Cracking (HIC) and producing stable hydrogen traps, Post Weld Heat Treatment (PWHT) was conducted. Microstructural analysis, X-ra...

Investigation of influences of alloying elements and sintering temperature on the properties of high strength low alloyed sintered steel

Producing parts with high density and improved mechanical properties is one of the most important aims of powder metallurgy process. There are many factors for attaining modified properties in sintered parts but among them controlling type and quantity of alloying elements and manufacturing parameters such as compacting pressure, sintering temperature are the most effective. In this research, t...

Effect of Alloying Elements on the Microstructure and Mechanical Properties of Austempered Ductile Iron Alloys

Effect of Alloying Elements on the Microstructure and Mechanical Properties of Austempered Ductile Iron Alloys