Oxygen plasma induced hydrophilicity of Parylene-C thin films
نویسندگان
چکیده
منابع مشابه
Hydrophilicity of Silica Nano-Porous Thin Films: Calcination Temperature Effects
In this research work, silica nano-porous thin films were deposited on glass substrates by layer by layer method. The thin films were calcinated at various calcination temperatures (200, 300, 400, and 500 °C). The morphology, surface characteristics, surface roughness and hydrophilic properties of the thin films were investigated by field emission scanning electron microscopy, attenuated total ...
متن کاملCorrosion Behavior of Parylene-Metal-Parylene Thin Films in Saline
In this paper, we study the corrosion behavior of parylene-metalparylene thin films using accelerated-lifetime soak tests. The samples under test are thin film resistors with a 200 nm layer of Au sandwiched by parylene-C on both sides, fabricated with parylenemetal skin technology. The samples are tested in hot saline both passively and actively, and different failure modes are observed using o...
متن کاملPlasma removal of Parylene C
Parylene C, an emerging material in microelectromechanical systems, is of particular interest in biomedical and lab-on-a-chip applications where stable, chemically inert surfaces are desired. Practical implementation of Parylene C as a structural material requires the development of micropatterning techniques for its selective removal. Dry etching methods are currently the most suitable for bat...
متن کاملEffect of magnesium doping on the light-induced hydrophilicity of ZnO thin films
Undoped and Mg-doped ZnO thin films were deposited on Si (111) and quartz substrates by using the sol–gel method. Microstructure, surface topography and water contact angle of the thin films have been measured by X-ray diffraction (XRD), an atomic force microscope (AFM) and water contact angle apparatus, respectively. The XRD results show that all the thin films are polycrystalline with a hexag...
متن کاملReliable and low-voltage electrowetting on thin parylene films
a r t i c l e i n f o The stability of an electrowetting system is dependent upon the choice of liquids, the dielectric material and the operating voltage. Substantial progress is reported herein on use of 300 nm thick poly(α, α, α′, α′-tetrafluoro-para-xylylene) (Parylene HT) films for almost 100° of reliable electrowetting modulation at only 15 V. Not only does Parylene HT exhibit improved re...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Surface Science
سال: 2012
ISSN: 0169-4332
DOI: 10.1016/j.apsusc.2012.06.112