Oxygen Mass Transfer Coefficient Application in Characterisation of Bioreactors and Fermentation Processes
نویسندگان
چکیده
Abstract This review article covers the topics of evaluation and experimental determination oxygen mass transfer coefficients ( k L a ) for their application in characterising bioreactors fermentations processes. The provides comparison different approaches determining bioreactors. Additionally, influence bioreactor design fermentation parameters on is discussed. aim to provide useful information regarding selecting working regimes achieve optimal results.
منابع مشابه
Development of a model to determine mass transfer coefficient and oxygen solubility in bioreactors
The objective of this paper is to present an experimentally validated mechanistic model to predict the oxygen transfer rate coefficient (Kla) in aeration tanks for different water temperatures. Using experimental data created by Hunter and Vogelaar, the formula precisely reproduces experimental results for the standardized Kla at 20 °C, comparatively better than the current model used by ASCE 2...
متن کاملRecent developments in modeling of solid-state fermentation: heat and mass transfer in bioreactors
Mathematical models are important tools for optimizing the design and operation of solid-state fermentation (SSF) bioreactors. Such models must describe the transport phenomena within the substrate bed and mass and energy exchanges between the bed and the other subsystems of the bioreactor, such as the bioreactor wall and headspace gases. The sophistication with which this has been done for SSF...
متن کاملPerformance of Biological hydrogen Production Process from Synthesis Gas, Mass Transfer in Batch and Continuous Bioreactors
Biological hydrogen production by anaerobic bacterium, Rhodospirillum rubrum was studied in batch and continuous bioreactors using synthesis gas (CO) as substrate. The systems were operated at ambient temperature and pressure. Correlations available in the literature were used to estimate the gas-liquid mass transfer coefficients (KLa) in batch reactor. Based on experimental results for the con...
متن کاملExperimental measurement of heat transfer coefficient and mass of deposited CaSO4 in subcooled flow boiling condition
Fouling is a common, fundamental and costly problem in heat transfer systems, which reduces thermal efficiency of equipment, increases the energy loss and causes strong damage to the heat transfer equipment in various industries. The main causes of fouling on the heat transfer surfaces are salts with inverse temperature-solubility in the fluid which calcium sulfate is one of the most important ...
متن کاملDynamic measurement of the volumetric oxygen transfer coefficient in fermentation systems.
Introduction Much has been written and said about the scale-up of fermentation systemsS). In general, it has been agreed that the best scale・,-up method is to maintain a constant voiumetric oxygen mass transfer coeMcient. The problem with this procedure has been the differing methods by which the transfer coeMelent has been obtained. Various investigators have used the su}fite oxidation2), pola...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Latvian Journal of Physics and Technical Sciences
سال: 2022
ISSN: ['0868-8257', '2255-8896', '2199-6156']
DOI: https://doi.org/10.2478/lpts-2022-0038