Oxide Layer on a Polished Surface
نویسندگان
چکیده
منابع مشابه
Dispersive charge carrier mobility in a surface oxide layer
The electrode impedance spectrum of the oxide produced on a Zr–1%Nb surface in an aqueous solution at 290 C is analysed as a function of temperature between 20 C and 290 C. The portion of the spectrum, relevant to the oxide, is treated in terms of a parallel CPEkRox equivalent circuit (CPE denoting constant phase element, Rox ohmic resistor). Considering also the effect of temperature CPE is un...
متن کاملSurface composition and texture of titanium polished with colloidal silica suspension and chromic oxide slurry.
CP titanium was polished with a colloidal silica suspension and chromic oxide slurry under low and high pressures. The polished surfaces were characterized by means of EPMA and XPS. Irrespective of polishing pressure, colloidal silica suspension successfully created a mirror-like surface that was clean at EPMA level. However, XPS detected a small amount of silicon on the outermost surface. On t...
متن کاملAnalytical Threshold Voltage Computations for 22 nm Silicon-on-Diamond MOSFET Incorporating a Second Oxide Layer
In this paper, for the first time, an analytical equation for threshold voltage computations in silicon-on-diamond MOSFET with an additional insulation layer is presented; In this structure, the first insulating layer is diamond which covered the silicon substrate and second insulating layer is SiO2 which is on the diamond and it is limited to the source and drain on both sides. Analytical solu...
متن کاملRigidity and Irregularity Effect on Surface Wave Propagation in a Fluid Saturated Porous Layer
The propagation of surface waves in a fluid- saturated porous isotropic layer over a semi-infinite homogeneous elastic medium with an irregularity for free and rigid interfaces have been studied. The rectangular irregularity has been taken in the half-space. The dispersion equation for Love waves is derived by simple mathematical techniques followed by Fourier transformations. It can be seen t...
متن کاملSurface integrity of fluid jet polished tungsten carbide
In recent years, Fluid Jet Polishing (FJP) has been studied for its potential as a finishing method on optical lenses, mirrors and molds for a number of materials, such a glass and nickel. In this paper, the surface integrity of binderless tungsten carbide after polishing by FJP was studied experimentally. Two aspects in particular were focused on: (1) identifying process conditions under which...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nature
سال: 1936
ISSN: 0028-0836,1476-4687
DOI: 10.1038/138291a0