OXIDATIVE CONVERSION OF METHANE OVER ReOX/ALUMINA CATALYSTS
نویسندگان
چکیده
منابع مشابه
Non-oxidative conversion of methane to aromatics over modified zeolite catalysts by transitional metals
The activity of different transitional metals over modified H-ZSM-5 catalysts for methane conversion to aromatics was compared. The first group of catalysts was Mo-impregnated H-ZSM-5 zeolites with 1, 3 and 6 wt% of Mo. The second group was M(3 wt%)- impregnated H-ZSM-5 (M: Ag, Cd, Cr, Mo, Zn and Mn). The catalytic activity of the first group was investigated at 600, 700 and 800 °C and gas hour...
متن کاملOxidative coupling of methane over doped Li/MgO catalysts
A series of zirconia doped Li/MgO catalysts with a fixed amount of zirconia and varying concentrations of lithium was used for the oxidative coupling of methane. It was found that an increase in lithium concentration resulted in a decrease in initial activity, while the selectivity was not affected. The life-time of Zr doped Li/MgO catalysts with a fixed concentration of ZrOz is a function of t...
متن کاملComparison of Oxidizing Agents for the Oxidative Coupling of Methane over State-of-the-Art Catalysts
The synthesis of selected state-of-the-art catalysts providing high performances in the oxidative coupling of methane (OCM) with O2 was reproduced according to the respective methods reported in literature. A reference material with identical stochiometric composition was further synthesized by applying the cellulose templating (CT) method. This method increases the surface area and affects the...
متن کاملEffect of Additives on Mn/SiO2 Based Catalysts on Oxidative Coupling of Methane
The Oxidative Coupling of Methane (OCM) over M-Na-Mn/SiO2 catalysts (M=W, Cr, Nb and V) was investigated using a continuous-flow quartz reactor at 775°C, 1 atm and 100 cm3min-1 gas flow rates, and correlated with the observed structure and redox properties.The interaction effects of the metal-metal and metal-support on the...
متن کاملPotassium/calcium/nickel oxide catalysts for oxidative coupling of methane
A series of potassium/calcium/nickel oxides were tested for the oxidative coupling of methane (OCM) at 843-943 K and water addition to the feed at O-65 mol-%. The K/Ni ratios varied from 0.0-0.6 and Ca/Ni from 0.0-11; catalysts with no nickel were also tested. At least 10% water in the feed and temperatures lower than ca. 940 K were necessary to keep nickel-containing catalysts from converting ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IZVESTIYA VYSSHIKH UCHEBNYKH ZAVEDENIY KHIMIYA KHIMICHESKAYA TEKHNOLOGIYA
سال: 2017
ISSN: 2500-3070,0579-2991
DOI: 10.6060/tcct.2017608.5644