Oxidation Dephosphorising Method of Molten Steel Containing Chromium
نویسندگان
چکیده
منابع مشابه
Oxidation of silicon containing steel
Steels containing sufficient concentrations of silicon tend to form a low melting temperature oxide called fayalite, which then penetrates both the steel and any other oxide to form a mechanical key. As a consequence, routine descaling operations fail to remove all traces of FeO that remain attached to the final product and oxidise to form a red oxide blemish on the surface. The formation of ox...
متن کاملEFFECT OF HIGH TEMPERATURE OXIDATION ON THE CORROSION BEHAVIOR OF ALUMINIZED LOW CARBON STEEL IN MOLTEN ALUMINUM
Hot dip aluminizing was carried out on the low carbon steel rod under optimized conditions. The aluminized samples were further oxidized at 1000̊C in air atmosphere at two different times of 20 and 60 minutes. Microstructure study and phase analysis were studied by scanning electron microscopy and X-ray diffraction methods, respectively. The characterization of the coating showed that, Fe2...
متن کاملEffect of Oxidation Temperature on the Oxidation Process of Silicon-Containing Steel
The oxidation behavior of silicon-containing steel was studied by applying segmented heating routes similar to the atmosphere and heating process in an industrial reheating furnace. The oxidation tests were carried out on a simultaneous thermal analyzer at heating temperatures of 1150 ̋C–1300 ̋C. The morphologies of Fe2SiO4 were observed by SEM, and the penetration depths of the Fe2SiO4 layer a...
متن کاملElectro-deposition and re-oxidation of carbon in carbonate-containing molten salts.
The electrochemical deposition and re-oxidation of solid carbon were studied in CO3(2-) ion-containing molten salts (e.g. CaCl2-CaCO3-LiCl-KCl and Li2CO3-K2CO3) at temperatures between 500 and 800 °C under Ar, CO2 or N2-CO2 atmospheres. The electrode reactions were investigated by thermodynamic analysis, cyclic voltammetry and chronopotentiometry in a three-electrode cell under various conditio...
متن کاملFormulation of Mold Level Control Model by Molten Steel Flow Analysis Method
This paper describes activities relating to mold level control in continuous casting process as case examples of our process control solution business, in which we clarify and evaluate the process phenomena and design the control system. Initially, a mold level control model has been formulated by fluid flow analysis technique that evaluates molten steel flow in the mold quantitatively. The mod...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 1988
ISSN: 0021-1575,1883-2954
DOI: 10.2355/tetsutohagane1955.74.2_286