Oxidation behaviour of a CoNiCrAlY/h-BN based abradable coating
نویسندگان
چکیده
منابع مشابه
Graphene Oxidation Barrier Coating
Since its experimental isolation in 2004, graphene has shown some outstanding properties. We propose that graphene can be used as an oxidation barrier coating and its oxidation resistance weakens at the graphene grain boundaries. Copper is a superior conductor but is easily oxidized in air at room temperature or higher. Using graphene as a coating material may reduce the cost of protecting agai...
متن کاملControl of Coating Properties of Abradable Seals by On-Line Process Diagnostics
The efficiency of gas turbines is highly dependent upon the clearance between compressor housing and rotating blades. Abradable seal coatings are employed to minimize the clearance and control the over-tip leakage by allowing the blade tips to cut into the coating and herewith implementing a method of self-adjustment. These coatings consist of a thermally sprayed multiphase material, comprising...
متن کاملNumerical investigation of abradable coating wear through plastic constitutive law: application to aircraft engines
In the field of turbomachines, better engine performances are achieved by reducing possible parasitic leakage flows through the closure of the clearance distance between blade tips and surrounding casings. Together with new technologies involving higher casing conicity for improved compression rates, direct contact is now considered as part of aircraft engines normal life. In order to avoid pos...
متن کاملFormation and Evaluation of Oxidation Behavior of Zirconia- Aluminide Coating on Nickel- Based Alloy
Practical applications of thermal barrier coatings with aluminide bond-coats are limited due to oxide scale spallation of the aluminide coating under applied thermal stresses. Considering the positive effects of oxygen-active elements or their oxides on the high temperature oxidation behavior, in this research zirconia was introduced into an aluminide coating. For this purpose, a Watts type bat...
متن کاملTio2 Coating by Gel Oxidation
Gel oxidation is a thermochemical method for the production of an oxide film on a metallic substrate, where the metallic substrate is subjected to gelation by immersion in NaOH solution, followed by oxidation.These films are prepared for biomedical implant coating. Continuous and discontinuous gelled and TiO2 films of submicron thickness were produced on high-purity Ti foil substrates (50μm thi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Corrosion Science
سال: 2019
ISSN: 0010-938X
DOI: 10.1016/j.corsci.2019.02.030