منابع مشابه
Thermal Expansion Behavior of Hot-Pressed Engineered Matrices
Advanced engineered matrix composites (EMCs) require that the coefficient of thermal expansion (CTE) of the engineered matrix (EM) matches those of the fiber reinforcements as closely as possible in order to reduce thermal compatibility strains during heating and cooling of the composites. The present paper proposes a general concept for designing suitable matrices for long fiber reinforced com...
متن کاملUV-Vis spectrophotometric analysis and light irradiance through hot-pressed and hot-pressed-veneered glass ceramics.
This study evaluated the irradiance of curing units through core and veneered hot-pressed ceramics as well as the transmittance of these materials. Discs of 0.7, 1.4 and 2 mm in thickness of Empress (EMP) and Empress Esthetic (EST), and 0.8 (n=5) and 1.1 mm (n=5) thickness of Empress 2 (E2) were obtained. For E2, two of the 0.8-mm-thick discs were covered with dentin (1.2- and 1.4-mm-thick) and...
متن کاملOxidation of Ca-α-SiAlON Powders Prepared by Combustion Synthesis
The oxidation of Ca-α-SiAlON synthesized by the combustion synthesis (CS) method with different additives was investigated in air atmosphere using thermogravimetric (TG) analysis in a temperature range from 1453 K to 1653 K. The experimental results indicated that oxidation was controlled by mixed chemical and diffusion steps. The oxidation products by XRD analysis were composed of SiO₂ and CaA...
متن کاملPredicting Thickness Swelling of Hot-pressed Wood Strands
Strand board can be manufactured from sawmill residues, branches, and crown wood left in the forest. The thickness swelling of these residues is quite different from that of mature wood and can have a negative effect on the physical and strength properties of strand board. A mixture of these materials and pressing conditions can be optimized by assessing thickness swelling of wood strands after...
متن کاملElectron microscopy characterization of hot - pressed Al substituted
Hot-pressing was used to prepare a dense (97% relative density) cubic Al substituted Li7La3Zr2O12 material at temperatures lower than typically used for solid-state and/or liquid phase sintering. Electron microscopy analysis revealed equiaxed grains, grain boundaries, and triple junctions free of amorphous and second phases and no Al segregation at grain boundaries. These results suggest that A...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Association, Japan
سال: 1981
ISSN: 0009-0255,1884-2127
DOI: 10.2109/jcersj1950.89.1027_148