OVERVIEW ON L9 TAGUCHI OPTIMIZATIONAL METHOD

Response of Wire Electrical Discharge Machining For H13 Using Taguchi L9 Array

This paper presents, the experimental study has been made to optimize the process parameters during machining of H-13 by wire electrical discharge machining (WEDM) using Taguchi L9 orthogonal array method. Following input process parameters of WEDM [Pulse-On time (TON), Pulse-Off time (TOFF) and Wire Speed rate (WS) and Wire Tension (WT)] were chosen as variables to study the process output in ...

Experimental Investigation on Radial Ball Bearing Parameters Using Taguchi Method

In this work, characteristics of various ball bearing parameters are studied under different loads and rotational speeds. By using Dimensional Analysis (DA), dimensionless parameters are computed which provides solution for a group of parameters. This analysis can be accomplished by using the Buckingham π-theorem. DA leads to reduction of the number of independent parameters involved in a probl...

Enhanced parallel cat swarm optimization based on the Taguchi method

In this paper, we present an enhanced parallel cat swarm optimization (EPCSO) method for solving numerical optimization problems. The parallel cat swarm optimization (PCSO) method is an optimization algorithm designed to solve numerical optimization problems under the conditions of a small population size and a few iteration numbers. The Taguchi method is widely used in the industry for optimiz...

Parametric Optimization on single objective Dry Turning using Taguchi Method

ABSTRACT The objective of this investigation is to obtain an optimal setting of process parameters in turning for maximizing the material removal rate of the manufactured component. The material removal rate has been investigated in this analysis while machining practically used components. As per Taguchi’s “Design of Experiments”, the number of experiments to be conducted in this analysis is c...

Robust Design and Taguchi Method Application