Overview of Printing Inks
نویسندگان
چکیده
منابع مشابه
Ink-Jet Printing Cotton with Cationic Reactive Dye Based Inks
The current commercial application of ink-jet reactive inks to cotton fabrics has been through pre-treating with pad liquor prior to printing. In This study made an effort to provide a single phase ink-jet printing process for printing cotton fabric using the novel cationic reactive dye in ink’s formulation. Cotton fabric was printed upon with the novel cationic reactive dye and commercial anio...
متن کاملPolymerization of Vegetable Oils and Their Uses in Printing Inks
Materials. Alkali-refined soybean oil was obtained from Riceland Foods (Stuttgart, AR) and Archer Daniels Midland (Decatur, IL). Alkali-refined canola and cottonseed oils were purchased from Bunge Oil (Bradley. IL). Alkalirefined sunflower oil was obtained from Archer Daniels Midland. Alkali-refined safflower oil was obtained from Pacific Anchor Chemical Co. (Cumberland, RI). Polystyrene standa...
متن کاملMicrofluidic Printheads for Multimaterial 3D Printing of Viscoelastic Inks.
Multimaterial 3D printing using microfluidic printheads specifically designed for seamless switching between two visco-elastic materials "on-the-fly" during fabrication is demonstrated. This approach opens new avenues for the digital assembly of functional matter with controlled compositional and property gradients at the microscale.
متن کاملPlanar and Three-Dimensional Printing of Conductive Inks
Printed electronics rely on low-cost, large-area fabrication routes to create flexible or multidimensional electronic, optoelectronic, and biomedical devices. In this paper, we focus on one- (1D), two- (2D), and three-dimensional (3D) printing of conductive metallic inks in the form of flexible, stretchable, and spanning microelectrodes. Direct-write assembly is a 1-to-3D printing technique tha...
متن کاملHydrophilic elastomers for microcontact printing of polar inks.
A moderately hydrophilic, thermoplastic elastomer (poly(ether-ester)) was investigated as a stamp material for microcontact printing of a polar ink: pentaerythritol-tetrakis-(3-mercaptopropionate). Stamps with a relief structure were produced from this polymer by hot embossing, and a comparison was made with conventional poly(dimethylsiloxane) (PDMS) and oxygen-plasma-treated PDMS. It is shown ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Colour Material
سال: 1997
ISSN: 0010-180X
DOI: 10.4011/shikizai1937.70.55