Overtopping Failure of a Reinforced Tailings Dam: Laboratory Investigation and Forecasting Model of Dam Failure

Determination of the Height and Overtopping failure of Reservoir Dams by Using Reliability Analysis (Case Study: Namrood Dam)

Generally, the design of dams and other hydraulic structures is carried out based on deterministic approaches. However, there are many uncertainties in the estimation of different effective parameters in hydraulic structures design. The inherent uncertainties in these parameters necessitate reliability analysis to ensure the structure stability. In this study, after investigating various uncert...

Diversion of Water from a Tailings Dam

Floods from tailings dam failures.

This paper compiles the available information on historic tailings dam failures with the purpose to establish simple correlations between tailings ponds geometric parameters (e.g., dam height, tailings volume) and the hydraulic characteristics of floods resulting from released tailings. Following the collapse of a mining waste dam, only a part of tailings and polluted water stored at the dam is...

Investigating the vulnerability downstream area of Taleghan dam due to dam failure

Due to the immense damage caused by dam failure, especially dams constructed near large cities, it is necessary to consider the breaking phenomena as well as studying and designing different parts of the dam. For this purpose, the hydrograph of the outflow due to dam failure must be identified according to size of the fracture and then flood routing, and flood zone must be determined based on t...

Numerical simulation of flood wave propagation due to failure of dam watersheds in fluent model

By numerical simulation of the phenomenon of failure of dams and the flow of their flow, it is possible to design more precisely the structures and their location. The purpose of this study was to investigate the wave propagation phenomenon due to the failure of the rocky mortar-watering dam in the Marivan sub-basin of Zarivar in two-dimensional and three-dimensional models using the Fluent mod...