Over-pressurized bioreactors: Application to microbial cell cultures

Over-pressurized bioreactors: application to microbial cell cultures.

In industrial biotechnology, microbial cultures are exposed to different local pressures inside bioreactors. Depending on the microbial species and strains, the increased pressure may have detrimental or beneficial effects on cellular growth and product formation. In this review, the effects of increased air pressure on various microbial cultures growing in bioreactors under moderate total pres...

Less Microbial Fuel Cell: Application of Pure and Mixed Cultures

Energy shortage and environmental pollution Microorganisms in the anode chamber oxidize fuel have caused global disasters. Thus, active research to (electron donor e.g. glucose, acetate, etc.) to produce find out alternate sources of energy especially renewable electrons and protons. Produced electrons are transferred sources of energy is a new trend [1]. In recent years, to cathode compartment...

High cell density cultivation of recombinant yeasts and bacteria under non-pressurized and pressurized conditions in stirred tank bioreactors.

This study demonstrates the applicability of pressurized stirred tank bioreactors for oxygen transfer enhancement in aerobic cultivation processes. The specific power input and the reactor pressure was employed as process variable. As model organism Escherichia coli, Arxula adeninivorans, Saccharomyces cerevisiae and Corynebacterium glutamicum were cultivated to high cell densities. By applying...

Dynamic Simulation and Control of Microbial Cell Population in Continuous Bioreactors

Microbial fuel cell performance with a pressurized cathode chamber.

Microbial fuel cell (MFC) power densities are often constrained by the oxygen reduction reaction rate on the cathode electrode. One important factor for this is the normally low solubility of oxygen in the aqueous cathode solution, which creates mass transport limitation and hinders oxygen reduction at the electrocatalyst (platinum, Pt). Here, we increased the air pressure in the cathode chambe...