Outgassing Rate of Stainless Steel Chamber Measured by XHV Throughput System.
نویسندگان
چکیده
منابع مشابه
Stainless Steel Type 316Ti
Allegheny Ludlum Type 316Ti (UNS S31635) is a titanium stabilized version of Type 316 molybdenum-bearing austenitic stainless steel. It is also known as DIN/EN designation No. 1.4571. The Type 316 alloys are more resistant to general corrosion and pitting/crevice corrosion than the conventional chromium-nickel austenitic stainless steels such as Type 304. They also offer higher creep, stress-ru...
متن کاملEffects of Outgassing from Some Materials on Gas Chamber Ageing
Several different materials that might be used for assembling Micro-strip gas chambers (MSGCs) for high luminosity experiments were tested by measuring the gain of an irradiated wire counter when each sample was put into contact with the gas upstream of the detector. The results show a fast effect on the gain of the counter for some of the materials tested, whereas others, like Stesalit, Vectra...
متن کاملAfrl-rx-wp-ja-2017-0165 Laser Surface Melting of Stainless Steel Anodes for Reduced Hydrogen Outgassing (postprint)
Anodes of 304 stainless steel have been processed by a continuous wave Yb fiber laser with a wavelength of 1.064 lm and subjected to 50 keV electron bombardment in order to determine the extent to which hydrogen outgassing is reduced by the laser surface melting treatment. The results show a reduction in outgassing, by approximately a factor of four compared to that from untreated stainless ste...
متن کاملMachinability Improvement of 17-4PH Stainless Steel by Cryogenic Cooling
17-4PH stainless steel is a martensitic precipitation hardening stainless steel that provides an outstanding combination of high strength, good corrosion resistance, good mechanical properties, good toughness in both base metal and welds, and short time, low-temperature heat treatments that minimize warpage and scaling. This valuable alloy is widely used in the aerospace, nuclear, chemical, pet...
متن کاملMachinability Improvement of 17-4PH Stainless Steel by Cryogenic Cooling
17-4PH stainless steel is a martensitic precipitation hardening stainless steel that provides an outstanding combination of high strength, good corrosion resistance, good mechanical properties, good toughness in both base metal and welds, and short time, low-temperature heat treatments that minimize warpage and scaling. This valuable alloy is widely used in the aerospace, nuclear, chemical, pet...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: SHINKU
سال: 1993
ISSN: 0559-8516,1880-9413
DOI: 10.3131/jvsj.36.234