Out-of-autoclave molding of carbon fiber composites pipes with interlaminar carbon nanotubes
نویسندگان
چکیده
Abstract. Carbon fiber reinforced (CFR) composite rings with and without interlaminar carbon nanotubes (I-CNTs) were manufactured starting from high performance prepregs used in aeronautics. Nano-particles deposition was obtained by an innovative easily scalable procedure which does not affect processability. A CNTs-solvent solution sonicated for established time to reduce bulk CNTs agglomerates. The poured on prepreg stripes left at room temperature solvent evacuation. wrapped steel pipe obtain the annular configuration out-of-autoclave (OOA) process. consolidation pressure applied through a thermo-shrinkable tube curing occurred oven. Stereomicroscopy mechanical tests performed CFR I-CNTs/CFR rings. good adhesion among plies observed as well positive effects of deposition; increase 34%, 15% 17% stiffness, peak load fracture energy functionalized rings, respectively.
منابع مشابه
investigation of the electronic properties of carbon and iii-v nanotubes
boron nitride semiconducting zigzag swcnt, $b_{cb}$$n_{cn}$$c_{1-cb-cn}$, as a potential candidate for making nanoelectronic devices was examined. in contrast to the previous dft calculations, wherein just one boron and nitrogen doping configuration have been considered, here for the average over all possible configurations, density of states (dos) was calculated in terms of boron and nitrogen ...
15 صفحه اولHierarchical Carbon Fiber Composites with Radially Aligned Carbon Nanotubes : Preservation of In - Plane Tensile Properties
Hierarchical carbon-nanotube (CNT)-based composites have significant potential to expand the performance and functionality of aerospace composite structures. Notably, circumferentially aligned CNT arrays have previously been grown on woven alumina filaments to form a "fuzzy fiber" reinforced plastic (FFRP) architecture with demonstrated improvements in interand intra-ply mechanical properties a...
متن کاملStrengthening and stiffening carbon fiber epoxy composites by halloysite nanotubes, carbon nanotubes and silicon carbide whiskers
متن کامل
Carbon Nanotubes to Improve Short Glass Fiber Composites
This paper discusses the potential use of multi-walled carbon nanotubes (MWCNTs) to improve the mechanical properties of short glass fiber composites. Two methods to incorporate MWCNTs in short glass fiber composite fabrication were examined. First, Carboxylic-functionalized MWCNTs were dispersed in a silane fiber sizing material and then were allowed to bond to the surface of glass fibers. Sec...
متن کاملElectrical and electromagnetic properties of isolated carbon nanotubes and carbon nanotube-based composites
Isolated carbon nanotubes (CNTs), CNT films and CNT-polymer nanocomposites are a new generation of materials with outstanding mechanical, thermal, electrical and electromagnetic properties. The main objective of this article is to provide a comprehensive review on the investigations performed in the field of characterizing electrical and electromagnetic properties of isolated CNTs and CNT-reinf...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials research proceedings
سال: 2023
ISSN: ['2474-3941', '2474-395X']
DOI: https://doi.org/10.21741/9781644902479-194