Origin of intragranular crystallographic misorientations in hot-dip Al–Zn–Si coatings
نویسندگان
چکیده
منابع مشابه
DESCRIPTION OF STRUCTURE OF Fe-Zn INTERMETALIC COMPOUNDS PRESENT IN HOT-DIP GALVANIZED COATINGS ON STEEL
P. Pokorny, J. Kolisko, L. Balik – Czech Technical University – Klokner Institute, Prague, Czech Republic P. Novak – Institute of Chemical Technology, Prague, Czech Republic The article is describing formation, composition, morphology and crystallographic characteristics of intermetalic compounds Fe Zn present in the coating formed during the process of low-temperature hot-dip galvanizing of ca...
متن کاملFormation oF outburst struCturE in hot dip galvannEalEd Coatings on iF stEEls
Rapid development of automotive industry brings also increased requirements for sheets properties, involving relatively high strength and good formability together with excellent corrosion resistance. Increasing requests for corrosion resistance lead to the production of coated car parts, protected mainly by zinc coatings. Whereas, majority of European producers of passenger cars use preferenti...
متن کاملHybrid Coatings Enriched with Tetraethoxysilane for Corrosion Mitigation of Hot-Dip Galvanized Steel in Chloride Contaminated Simulated Concrete Pore Solutions
Hybrid sol-gel coatings, named U(X):TEOS, based on ureasilicate matrices (U(X)) enriched with tetraethoxysilane (TEOS), were synthesized. The influence of TEOS addition was studied on both the structure of the hybrid sol-gel films as well as on the electrochemical properties. The effect of TEOS on the structure of the hybrid sol-gel films was investigated by solid state Nuclear Magnetic Resonan...
متن کاملexperimental and numerical study of microstructure formation and the origin of crystallographic misorientation in ai-zn-si alloy coatings
.......................................................................................................................................III VERSION ABREGEE ........................................................................................................................ V ACKNOWLEDGEMENTS..........................................................................................................
متن کاملCrystallographic texture in pulsed laser deposited hydroxyapatite bioceramic coatings.
The orientation texture of pulsed laser deposited hydroxyapatite coatings was studied by X-ray diffraction techniques. Increasing the laser energy density of the KrF excimer laser used in the deposition process from 5 to 7 J/cm(2) increases the tendency for the c-axes of the hydroxyapatite grains to be aligned perpendicular to the substrate. This preferred orientation is most pronounced when th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Materialia
سال: 2008
ISSN: 1359-6454
DOI: 10.1016/j.actamat.2008.04.037