Orientation of Steel Fibers in Magnetically Driven Concrete and Mortar
نویسندگان
چکیده
منابع مشابه
Orientation of Steel Fibers in Magnetically Driven Concrete and Mortar
The orientation of steel fibers in magnetically driven concrete and magnetically driven mortar was experimentally studied in this paper using a magnetic method. In the magnetically driven concrete, a steel slag was used to replace the coarse aggregate. In the magnetically driven mortar, steel slag and iron sand were used to replace the fine aggregate. A device was established to provide the mag...
متن کاملStrength and Toughness of Reinforced Concrete with Coated Steel Fibers
The effect of zinc phosphate (ZP) and zinc calcium phosphate (ZCP) coatings on the reinforcing mechanisms of smooth steel fiber in cementitious matrix have been studied. The results of pull out tests illustrated that by coating smooth steel fiber the pull-out load may be increased up to 100%. The effect of zinc phosphate coating on interface bonding was more than zinc-calcium phosphate coating....
متن کاملFlexural Behavior of GFRP Tubes Filled with Magnetically Driven Concrete
Experimental investigation of GFRP (glass fiber reinforced polymer) tubes that were filled with magnetically driven concrete was carried out to study the flexural behavior of specimens under bending. Specimens having different cross section and lengths were tested. The test specimens were fabricated by filling magnetically driven concrete into the GFRP tubes and the concrete was vibrated using ...
متن کاملExperimental Study & Strength of Concrete by Using Steel & Glass Fibers
---------------------------------------------------------------------***--------------------------------------------------------------------Abstract Concrete is the most widely utilized “manmade” material globally for construction in many developing countries in all types of civil engineering works. Also, concrete is an environmental friendly material and in areas of growing environment – relat...
متن کاملMixed Mode Fracture in Reinforced Concrete with Low Volume Fraction of Steel Fibers
An investigation into the mixed mode fracture of steel fiber reinforced concrete (SFRC)beams with one percent volume fraction of steel fiber is presented. A series of notched beams withdifferent notch depths and locations are tested under three-point bending. The test results for apparentfracture toughness, crack trajectories, and fracture energy are presented. The crack paths for SFRCand plain...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2018
ISSN: 1996-1944
DOI: 10.3390/ma11010170