ORIENTATION BEHAVIOR DURING UNIAXIAL STRETCHING BY WET PROCESS IN WATER FOR NYLON-6 FILMS
نویسندگان
چکیده
منابع مشابه
simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Crystalline and Amorphous Orientation of Polypropylene / Nylon 6 Blend Filaments
N6) made with or without PP-g-MAH as compatibilizer are investigated. The blend filaments produced at the take-up speeds of 300 and 800 m/min were drawn with draw ratio of 3.5 and 2, respectively. Effects of blending of N6 with PP on birefringence , crystalline, and amorphous orientation factors of the composite filaments are studied. The amorphous orientation factor, fam of PP was found to inc...
متن کاملOrientation-specific responses to sustained uniaxial stretching in focal adhesion growth and turnover.
Cells are mechanosensitive to extracellular matrix (ECM) deformation, which can be caused by muscle contraction or changes in hydrostatic pressure. Focal adhesions (FAs) mediate the linkage between the cell and the ECM and initiate mechanically stimulated signaling events. We developed a stretching apparatus in which cells grown on fibronectin-coated elastic substrates can be stretched and imag...
متن کاملDamage Behavior in Modern Automotive High Strength Dual Phase Steels During Uniaxial Tensile Deformation
In the present research, damage mechanisms during room temperature uniaxial tensile testing of two different modern high strength dual phase steels,DP780 and DP980, were studied. Detailed microstructural characterization of the strained and sectioned samples was performed by scanning electron microscopy (SEM). The results revealed that interface decohesion, especially at the triple junctions of...
متن کاملModification of Nylon 6 , 6 1
Nylon 6, 6 is regarded as tough and ductile materials since it exhibit high tensile elongation to break and high drop weight impact strengths. However, under conditions of stress concentration such as in the presence of sharp notches or cracks, polyamides exhibit brittle failure. This property, evaluated as notched Izod or Charpy impact tests, indicates that unmodified polyamides exhibit relati...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sen'i Gakkaishi
سال: 1987
ISSN: 0037-9875,1884-2259
DOI: 10.2115/fiber.43.14