Organic Thin Film Fabrication by Ultrahigh Vacuum Technique
نویسندگان
چکیده
منابع مشابه
Fabrication of Thin Palladium-Silver Alloy Film by Using Electroplating Technique
A thin Pd-Ag alloy film, which will be applied to fabricate membranes for hydrogen separation, was successfully deposited using an electroplating technique. The plating solution for the formation of a thin Ag-rich Ag-Pd film for electric contact consisted of PdCl2, AgNO3, HBr, and HNO2. An improvement of the electrolytic bath was achieved by a pH control, which was kept constant at 6.6 and by t...
متن کاملStable organic thin-film transistors
Organic thin-film transistors (OTFTs) can be fabricated at moderate temperatures and through cost-effective solution-based processes on a wide range of low-cost flexible and deformable substrates. Although the charge mobility of state-of-the-art OTFTs is superior to that of amorphous silicon and approaches that of amorphous oxide thin-film transistors (TFTs), their operational stability general...
متن کاملUltrahigh mobility and efficient charge injection in monolayer organic thin-film transistors on boron nitride
Organic thin-film transistors (OTFTs) with high mobility and low contact resistance have been actively pursued as building blocks for low-cost organic electronics. In conventional solution-processed or vacuum-deposited OTFTs, due to interfacial defects and traps, the organic film has to reach a certain thickness for efficient charge transport. Using an ultimate monolayer of 2,7-dioctyl[1]benzot...
متن کاملOrganic Thin Film Field-effect Transistors (otfts) Are Organic Thin Film Transistors
particularly interesting as their fabrication processes are much less complex compared with conventional Si technology, which involves high-temperature and high-vacuum deposition processes and sophisticated photolithographic patterning methods. In general, low-temperature deposition and solution processing can replace the more complicated processes involved in conventional Si technology. In add...
متن کاملUltrahigh Flux Thin Film Boiling Heat Transfer Through Nanoporous Membranes.
Phase change heat transfer is fundamentally important for thermal energy conversion and management, such as in electronics with power density over 1 kW/cm^2. The critical heat flux (CHF) of phase change heat transfer, either evaporation or boiling, is limited by vapor flux from the liquid-vapor interface, known as the upper limit of heat flux. This limit could in theory be greater than 1 kW/cm2...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sen'i Gakkaishi
سال: 1989
ISSN: 0037-9875,1884-2259
DOI: 10.2115/fiber.45.5_p210