Organic-Ruthenium(II) Polypyridyl Complex Based Sensitizer for Dye-Sensitized Solar Cell Applications
نویسندگان
چکیده
منابع مشابه
A highly efficient organic sensitizer for dye-sensitized solar cells.
We have synthesized a highly efficient organic dye for a dye-sensitized solar cell; the overall solar-to-energy conversion efficiency was 9.1% at AM 1.5 illumination (100 mW cm(-2)): short-circuit current density (J(sc)) = 18.1 mA cm(-2), open circuit photovoltage (V(oc)) = 743 mV and fill factor (ff) = 0.675.
متن کاملNovel quinoxaline-based organic sensitizers for dye-sensitized solar cells.
Novel quinoxaline-based organic sensitizers using vertical (RC-21) and horizontal (RC-22) conjugation between an electron-donating triphenylamine unit and electron-accepting quinoxaline unit have been synthesized and used for dye-sensitized solar cells (DSSCs), leading to the relatively high power conversion efficiencies of 3.30 and 5.56% for RC-21 and RC-22, respectively. This result indicates...
متن کاملApplication of azo dye as sensitizer in dye-sensitized solar cells
An azo dye used as photosensitizers in Dye-sensitized solar cells DSSCs. Azo dyes economically superior to organometallic dyes because they are color variation and cheap. The spectrophotometric evaluation of an azo dye in solution and on a TiO2 substrate show that the dye form J-aggregation on the nanostructured TiO2 substrate. Oxidation potential measurements for used azo dyes ensured an energ...
متن کاملDye-Sensitized Solar Cell for Energy Harvesting Applications
A dye-sensitized solar cell (DSC) has unique properties that the cell performance does not readily decrease even at higher incident light angles compared with a Si solar cell and dose not decrease or rather increases under low light conditions. Fujikura is developing new applications of DSC by taking advantages of these properties to the field of “Energy Harvesting” where rapid growth of market...
متن کاملDye-sensitized CuAlO2 photocathodes for tandem solar cell applications
Dye-sensitized solar cells (DSCs) using the p-type semiconductor CuAlO2, in conjunction with a highly effective hole injecting dye and an iodide-triiodide-based electrolyte have been produced, demonstrating photocathodic behavior. An improved open-circuit voltage (VOC) of 333 mV was observed, compared to analogous devices using NiO, which can be explained by the CuAlO2 valence-band energy, whic...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in OptoElectronics
سال: 2011
ISSN: 1687-563X,1687-5648
DOI: 10.1155/2011/294353