Organic light-emitting diodes formed by soft contact lamination
نویسندگان
چکیده
منابع مشابه
Organic light-emitting diodes formed by soft contact lamination.
Although tremendous progress has been made in organic light-emitting diodes (OLEDs), with few exceptions they are fabricated in the standard way by sequentially depositing active layers and electrodes onto a substrate. Here we describe a different approach for building OLEDs, which is based on physical lamination of thin metal electrodes supported by an elastomeric layer against an electrolumin...
متن کاملContact resistance in organic transistors that use source and drain electrodes formed by soft contact lamination
Soft contact lamination of source/drain electrodes supported by gold-coated high-resolution rubber stamps against organic semiconductor films can yield high-performance organic transistors. This article presents a detailed study of the electrical properties of these devices, with an emphasis on the nature of the laminated contacts with the pand n-type semiconductors pentacene and copper hexadec...
متن کاملContact Injection into Polymer Light-Emitting Diodes
The variation of current I with voltage V for poly(phenylene vinylene) and other polymer light-emitting diodes has been attributed to carriers tunneling into broad conduction and valence bands. In actuality the electrons and holes tunnel into polaron levels and transport is by hopping among these levels. We show that for small injection the I-V characteristic is determined mainly by the image f...
متن کاملOrganic quantum well light emitting diodes
This work reports on simulation and experimental investigation into the charge transport and electroluminescence in a quantum well (QW) organic light emitting diode (OLED) consisting of a N,N′-di(naphthalene-1-yl)-N,N′-diphenylbenzidine (NPB) as a hole transport layer, tris (8-hydroxyquinoline) aluminum (Alq3) as a potential barrier and electron transporting layer, and rubrene as potential well...
متن کاملDegradation in Organic Light Emitting Diodes
The objective is to fabricate organic light emitting diode and to study its degradation process in atmosphere condition in which PFO as an emitting material and PEDOT:PSS as a hole injecting material were used on ITO substrate. Thus degradation process of the OLED was studied upon its current-voltage characteristic. By fabricating this OLED and obtaining blue light and analysis of current-volta...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Proceedings of the National Academy of Sciences
سال: 2004
ISSN: 0027-8424,1091-6490
DOI: 10.1073/pnas.0304179101